Posts made by agf998

undefined

Hi, i have idex 3d printer that have printing hotends, and also on another head, laser module. My problem is when i add the laser in the config, the dashboard turn to cnc mode, and then i can't control the hotends temperature. There is any addon i can use to control both laser and hotend?

undefined

@phaedrux this is my config, but i need to edit it anyway... but if you can explain me what to do, it will be great.config.g

; Configuration file for Duet Ethernet
; Firmware version 2.0
; Executed by the firmware on start-up
; Last update 31.08.2018 by Guyaros


; Communication and general preferences
M550 PMICRON EME EAGLE F1; 			Set machine name
;M551 PEAGLE1; 					Set machine password
M111 S0; 					Debugging off
G21; 						Work in millimetres
G90; 						Set absolute coordinates
M83; 						Relative extruder moves
M555 P1; 					Set firmware compatibility to look like RepRapFirmare
M575 P1 B57600 S1; 				Comms parameters for PanelDue

M291 R"Printer initilzing" P"Please wait" S1 T10;

; Network configurations
M540 P0xBE:0xEF:0xDE:0xAD:0xFE:0xED;		 MAC Address
M552 P192.168.1.14;				Set IP address
M554 P192.168.1.255; 		`		Set Gateway
M553 P255.255.255.0; 				Netmask
M552 S1; 					Activate network as a client


; Stepper Driver configurations
M584 X0 U5 Y1 Z2 E3:4; 		Set custom drive mapping

M569 P0 S0; 					Set stepper driver 0 (P0) to Spin Backwards (S0) [X]
M569 P1 S0;					Set stepper driver 1 (P1) to Spin Forward (S1) [Y]
M569 P2 S0; 					Set stepper driver 2 (P2) to Spin Backwards (S0) [Z]

M569 P5 S1; 					Set stepper driver 5 (P5) to Spin Forward (S1) [U]

M569 P3 S1; 					Set stepper driver 3 (P3) to Spin Forward (S1) [E0]
M569 P4 S0; 					Set stepper driver 4 (P4) to Spin Backwards (S0) [E1]


M350 X16 U16 Y16 Z16 E16:16 I0; 	Configure microstepping (x16), Interpolation disabled (I0)

; Motors configurations
M906 X1200 U1200 Y1200 Z1400 E800:800 I15; 	Set motors currents (mA) and motors idle factor to 15% (Inn)
M84 S30; 							Idle the stepper motors after 30 seconds of inactivity
M92 X71.111 U71.111 Y71.111 Z800;		Set axis steps-per-mm (X,Y Pully 15[teeth], pitch 3[mm])(Z leadscrew pitch 4[mm/rev])
			
M92 E1540:1540;					Set extruder steps-per-mm  (Cobra water, Gear ratio 1:13.76, Hobb gear diameter 9.57[mm])	

; Kinematics configurations
M201 X6000 U6000 Y6000 Z600 E600:600; 			Set accelerations (mm/s^2)
M204 P5000 T5000;								Set print and travel accelrations [mm/s^2] 
M566 X840 U840 Y840 Z840 E120:120; 				Set maximum instantaneous speed changes (mm/min)
M203 X15000 U15000 Y15000 Z960 E1800:1800; 		Set Maximum speeds (mm/min)

; Travel configuration
M208 X-59 Y-163 U-126 Z-86 S1; 					Set axis minimal travel (S1)
M208 X272 Y87 U205 Z183 S0;						Set axis maximal travel (S0)

; Endstops configuration
M574 X2 U2 Y1 S1; 					 Xmin, Umin, Vmin, Wmin, Ymax, Active HIGH microswitches
M574 Z2 S1;							 Zmax, Active HIGH microswitch

; Motor stall detection
;M915 P0 X S63;


; Temperature sensor and heaters configurations
; Bed
M305 P0 T94740 B4233 R4700 L0 H0; 	Set (Bed) Heater 0 (P0), thermistor resistance in 25[deg] (T94573), Beta value (B4230), series resistor value (R4700)
M307 H0 A104.4 C1006 D1.0 S1.0; 	Set heating process parameters, Heater 0 (H0)(Bed), Gain (Annn), Time const (Cnnn), Dead time (Dnn),
M143 H0 S140; 				Set Heater 0 (H0)(Bed), maximum temperature to 140[deg-Celsius]
;M570 H0 P60 T25;			Configure heater fault detection


; Extruder E0 (Paired to X-Axis)
M305 P1 T94740 B4233 R4700 L0 H0;	Set Heater 1 (P1), thermistor resistance in 25[deg] (T94573), Beta value (B4230), series resistor value (R4700)
M307 H1 A367.9 C689.8 D20 S1.0; 	Set Heater 1 (H1) (Extruder E0), Gain (A), Const time, Dead time 20[sec] (D20), max PWM 100% (S1.0)
M143 H1 S280; 				Set Heater 1 maximum temperature
M570 H1 P30 T90;			Configure heater fault detection Time in seconds for which a temperature anomaly must persist, Permitted temperature excursion from the setpoint

; Extruder E1 (Paired to U-Axis)
M305 P2 T94740 B4233 R4700 L0 H0;	Set Heater (P2), thermistor resistance in 25[deg] (T94573), Beta value (B4230), series resistor value (R4700)
M307 H2 A367.9 C689.8 D20 S1.0; 	Set Heater 2 (H2), Gain (A), Const time, Dead time 20[sec] (D20), max PWM 100% (S1.0)
M143 H2 S280; 				Set maximum Heater 2 temperature
;Configure heater fault detection, Heater number, Time in seconds for which a temperature anomaly must persist, Permitted temperature excursion from the setpoint
M570 H2 P30 T90;
					

;M135 S200;				 Set PID sample interval [ms] (Sn)


; Fans output configurations
M106 P0 S1 F100 H1 T150;			Set Fan 0 output (P0), Set to On (S1), Freq 100, Thermostatic control to Heater1, Activte at 150[deg] 
M106 P1 S1 F100 H2 T150; 			Set Fan 1 output (P1), Set to On (S1), Freq 100, Thermostatic control to Heater2, Activte at 150[deg], Blip
M106 P5 S0 F100 H-1; 				Set Fan 5 output 
M106 P6 S0 F100 H-1; 				Set Fan 6 output 
M106 P7 S0 F100 H-1; 				Set Fan 7 output 
M106 P8 S0 F100 H-1; 				Set Fan 8 output 


; Tools
M563 S"X" P0 D0 H1 F5; 				Create Tool 0 (P0), using Extruder drive 0 (D0), using Heater 1, using Fan5
G10 P0 X0 Y0 R0 S0; 				Set tool 0 axis offsets, active and standby temperatures to 0C

M563 S"U" P1 D1 X3 H2 F6; 			Create Tool 1 (P1), using Extruder drive 1 (D1), using Heater 2, using Fan6, X-axis movement mapped to U
G10 P1 U0 Y0 R0 S0; 				Set tool 1 axis offsets, active and standby temperatures to 0C





T0;						Select Tool 0

M302 P0;					Dont allow cold extrusion
M564 H0; 					Allow axis movement before homing on

M291 R"Printer initilzing completed" P"Printer ready" S2

undefined

@kb58 ok, but where i can change it? Where i can choose that the offset is from U axis and not X axis?

undefined

Hi, I'm build a idex 3d printer, and the z probe is on the left head. I know that everyone says to put it on the right head, but i have no options...
So there is any way to configure this option in reprap?
Thanks

undefined

9:27:17 PMM122
=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.01(RTOS) running on Duet Ethernet 1.02 or later + DueX2
Board ID: 08DGM-956GU-DJMSN-6J9D4-3S86R-1BRMG
Used output buffers: 3 of 20 (16 max)
=== RTOS ===
Static ram: 28476
Dynamic ram: 96376 of which 0 recycled
Exception stack ram used: 360
Never used ram: 5860
Tasks: NETWORK(ready,328) HEAT(blocked,872) MAIN(running,3540)
Owned mutexes:
=== Platform ===
Last reset 00:16:02 ago, cause: reset button or watchdog
Last software reset at 2021-02-03 21:11, reason: User, spinning module GCodes, available RAM 5836 bytes (slot 1)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x00417000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
Error status: 0
Free file entries: 10
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 0.0ms, max retries 0
MCU temperature: min 31.0, current 32.6, max 33.1
Supply voltage: min 24.3, current 24.5, max 24.6, under voltage events: 0, over voltage events: 0
Driver 0: standstill, SG min/max 0/1
Driver 1: standstill, SG min/max not available
Driver 2: standstill, SG min/max 0/472
Driver 3: standstill, SG min/max not available
Driver 4: standstill, SG min/max not available
Driver 5: standstill, SG min/max not available
Driver 6: standstill, SG min/max not available
Expansion motor(s) stall indication: no
Date/time: 2021-02-03 21:27:17
Slowest loop: 10.86ms; fastest: 0.08ms
=== Move ===
Hiccups: 0, StepErrors: 0, LaErrors: 0, FreeDm: 240, MinFreeDm: 238, MaxWait: 194711ms, Underruns: 0, 0
Scheduled moves: 15, completed moves: 15
Bed compensation in use: none
Bed probe heights: 0.000 0.000 0.000 0.000 0.000
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
Heater 1 is on, I-accum = 0.0
=== GCodes ===
Segments left: 0
Stack records: 3 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is idle in state(s) 0
serial is idle in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 12.65ms; fastest: 0.02ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
Interface state: 5
=== Expansion ===
DueX I2C errors 0

9:33:31 PMError: M563: Tool creation: bad drive number
Error: G10: Attempt to set/report offsets and temperatures for non-existent tool: 2
Error: M563: Tool creation: bad drive number
Error: G10: Attempt to set/report offsets and temperatures for non-existent tool: 3

undefined

The z end stop is on the top of the printer, when i homing the bed goes up till it touch the endstop. The endstop is in the 0 location (up), and the max is 183 (down).
Actually, like cube corexy...

undefined

Hi, i am building a printer, i already have the configuration files for that printer, but there is one issue.
After homing the z axis, i can move it only in the direction of the head (in this printer the bed goes up and down) so i can't work with it. Can you please help me to solve this? I will add video of the problem and the config file.

This is the video:
https://drive.google.com/file/d/17oy-HT4kY1JTtBRpldjHiAvjln2T5XJX/view?usp=drivesdk

And this is the config:

; Stepper Driver configurations
M584 X0 U5 Y1 Z2 E3:4; Set custom drive mapping

M569 P0 S0; Set stepper driver 0 (P0) to Spin Backwards (S0) [X]
M569 P1 S0; Set stepper driver 1 (P1) to Spin Forward (S1) [Y]
M569 P2 S1; Set stepper driver 2 (P2) to Spin Backwards (S0) [Z]

M569 P5 S1; Set stepper driver 5 (P7) to Spin Forward (S1) [U]


M569 P3 S1; Set stepper driver 3 (P3) to Spin Forward (S1) [E0]
M569 P4 S0; Set stepper driver 4 (P4) to Spin Backwards (S0) [E1]


M350 X16 U16 V16 W16 Y16 Z16 E16:16:16:16 I0; Configure microstepping (x16), Interpolation disabled (I0)

; Motors configurations
M906 X1200 U1200 V1200 W1200 Y1200 Z1400 E800:800:800:800 I15; Set motors currents (mA) and motors idle factor to 15% (Inn)
M84 S30; Idle the stepper motors after 30 seconds of inactivity
M92 X71.111 U71.111 V71.111 W71.111 Y71.111 Z800; Set axis steps-per-mm (X,Y Pully 15[teeth], pitch 3[mm])(Z leadscrew pitch 4[mm/rev])
M564 H0

M92 E1540:1540:1540:1540; Set extruder steps-per-mm  (Cobra water, Gear ratio 1:13.76, Hobb gear diameter 9.57[mm])

; Kinematics configurations
M201 X6000 U6000 V6000 W6000 Y6000 Z600 E600:600:600:600; Set accelerations (mm/s^2)
M204 P5000 T5000; Set print and travel accelrations [mm/s^2]
M566 X840 U840 V840 W840 Y840 Z840 E120:120:120:120; Set maximum instantaneous speed changes (mm/min)
M203 X15000 U15000 V15000 W15000 Y15000 Z960 E1800:1800:1800:1800; Set Maximum speeds (mm/min)

; Travel configuration
M208 X-59 Y-163 U-126 V-198 W-268 Z-2.0 S1; Set axis minimal travel (S1)
M208 X272 Y137 U205 V133 W63 Z183 S0; Set axis maximal travel (S0)

; Endstops configuration
M574 X2 U2 V2 W2 Y1 S1; Xmin, Umin, Vmin, Wmin, Ymax, Active HIGH microswitches
M574 Z1 S1; Zmax, Active HIGH microswitch

; Motor stall detection
;M915 P0 X S63;

; Z Probe configurations
M558 P1 Z0 F240 H1 T5400; Set Z probe type to IR probe (P1),  homing Z axis (Z0), Feed rate 4[mm/sec] (F240), Dive height 1[mm] (H1), Travel speed between points 90[mm/sec] (T5400),
G31 X33 Y35.6 Z0.5 P500; Set the probe offset on X axis (Xn), set Z probe trigger height (Zn), set probe output value at trigger height (P500)
M557 X30:180 Y50:220 S30;   Set probing grid for Auto Bed Leveling using G29 command, X(min:max) Y(min:max) S(Spacing)

; Temperature sensor and heaters configurations
; Bed
M305 P0 T94740 B4233 R4700 L0 H0; Set (Bed) Heater 0 (P0), thermistor resistance in 25[deg] (T94573), Beta value (B4230), series resistor value (R4700)
M307 H0 A104.4 C1006 D1.0 S1.0; Set heating process parameters, Heater 0 (H0)(Bed), Gain (Annn), Time const (Cnnn), Dead time (Dnn),
M143 H0 S140; Set Heater 0 (H0)(Bed), maximum temperature to 140[deg-Celsius]
;M570 H0 P60 T25; Configure heater fault detection


; Extruder E0 (Paired to X-Axis)
M305 P1 T94740 B4233 R4700 L0 H0; Set Heater 1 (P1), thermistor resistance in 25[deg] (T94573), Beta value (B4230), series resistor value (R4700)
M307 H1 A439 C115.1 D3.5 S1.0; Set Heater 1 (H1) (Extruder E0), Gain (A), Const time, Dead time 20[sec] (D20), max PWM 100% (S1.0)
M143 H1 S350; Set Heater 1 maximum temperature
M570 H1 P30 T90; Configure heater fault detection Time in seconds for which a temperature anomaly must persist, Permitted temperature excursion from the setpoint

; Extruder E1 (Paired to U-Axis)
M305 P2 T94740 B4233 R4700 L0 H0; Set Heater (P2), thermistor resistance in 25[deg] (T94573), Beta value (B4230), series resistor value (R4700)
M307 H2 A284.6 C82.4 D4.6 S1.0; Set Heater 2 (H2), Gain (A), Const time, Dead time 20[sec] (D20), max PWM 100% (S1.0)
M143 H2 S350; Set maximum Heater 2 temperature
;Configure heater fault detection, Heater number, Time in seconds for which a temperature anomaly must persist, Permitted temperature excursion from the setpoint
M570 H2 P30 T90;

; Extruder E2 (Paired to V-Axis)
M305 P3 T94740 B4233 R4700 L0 H0; Set Heater (P3), thermistor resistance in 25[deg] (T94573), Beta value (B4230), series resistor value (R4700)
M307 H3 A191.4 C61.6 D5.5 S1.0; Set Heater 3 (H3), Gain (A), Const time, Dead time 20[sec] (D20), max PWM 100% (S1.0)
M143 H3 S280; Set maximum Heater 3 temperature
;Configure heater fault detection, Heater number, Time in seconds for which a temperature anomaly must persist, Permitted temperature excursion from the setpoint
M570 H3 P30 T90;

; Extruder E3 (Paired to W-Axis)
M305 P4 T94740 B4233 R4700 L0 H0; Set Heater (P4), thermistor resistance in 25[deg] (T94573), Beta value (B4230), series resistor value (R4700)
M307 H4 A191.4 C61.6 D5.5 S1.0; Set Heater 4 (H4), Gain (A), Const time, Dead time 20[sec] (D20), max PWM 100% (S1.0)
M143 H4 S280; Set maximum Heater 2 temperature
;Configure heater fault detection, Heater number, Time in seconds for which a temperature anomaly must persist, Permitted temperature excursion from the setpoint
M570 H4 P30 T90;

;M135 S200; Set PID sample interval [ms] (Sn)


; Fans output configurations
M106 P0 S1 F100 H1 T150; Set Fan 0 output (P0), Set to On (S1), Freq 100, Thermostatic control to Heater1, Activte at 150[deg]
M106 P1 S1 F100 H2 T150; Set Fan 1 output (P1), Set to On (S1), Freq 100, Thermostatic control to Heater2, Activte at 150[deg], Blip
M106 P2 S0 F100 H-1; Set Fan 2 output
M106 P3 S1 F100 H3 T150; Set Fan 3 output (P3), Set to On (S1), Freq 100, Thermostatic ccontrol to Heater3, Activte at 150[deg]
M106 P4 S1 F100 H4 T150; Set Fan 4 output (P4), Set to On (S1), Freq 100, Thermostatic ccontrol to Heater3, Activte at 150[deg]
M106 P5 S0 F100 H-1; Set Fan 5 output
M106 P6 S0 F100 H-1; Set Fan 6 output
M106 P7 S0 F100 H-1; Set Fan 7 output
M106 P8 S0 F100 H-1; Set Fan 8 output


; Tools
M563 S"X" P0 D0 H1 F5; Create Tool 0 (P0), using Extruder drive 0 (D0), using Heater 1, using Fan5
G10 P0 X0 Y0 R0 S0; Set tool 0 axis offsets, active and standby temperatures to 0C

M563 S"U" P1 D1 X3 H2 F6; Create Tool 1 (P1), using Extruder drive 1 (D1), using Heater 2, using Fan6, X-axis movement mapped to U
G10 P1 U0 Y0 R0 S0; Set tool 1 axis offsets, active and standby temperatures to 0C

M563 S"V" P2 D2 X4 H3 F7; Create Tool 2 (P2), using Extruder drive 2 (D2), using Heater 3, using Fan7, X-axis movement mapped to V
G10 P2 V0 Y0 R0 S0; Set tool 2 axis offsets, active and standby temperatures to 0C

M563 S"W" P3 D3 X5 H4 F8; Create Tool 3 (P3), using Extruder drive 3 (D3), using Heater 4, using Fan8,  X-axis movement mapped to W
G10 P3 W0 Y0 R0 S0; Set tool 3 axis offsets, active and standby temperatures to 0C


M98 Phomeall.g; Calls to the file homeall.g
T0; Select Tool 0

M302 P0; Dont allow cold extrusion
M564 H0; Allow axis movement before homing on

M291 R"Printer initilzing completed" P"Printer ready" S2
M501