Topics created by adamj12b

What benefit are you looking for?

Its possible to build a hotend with a many thermal zones as you want. Gets a bit complicated to assemble, plus it gets very expensive fast.

But what benefit do you think you'll get from that cooler nozzle?
Because having wildly different temps in the zones just increases the risk of boiling the polymer when the dwell time is too long.
Plus when extruding at a high rate, that polymer flow is going to equalise the temps quite quickly.

@OwenD said in Multiple Web Cameras:

@adamj12b
You could put the URL of the first camera in the normal DWC camera configuration and the URL of the second camera in the section that says something like "URL when image clicked"

Thats a good short term work around!

@Martin1454 said in Multiple Web Cameras:

Maybe you can run OBS stream, either on another device - Or if you have a duet 3 with an RPI, then on the RPI it self - That should be able to merge the 2 streams

I have not heard of OBS, but I will look into it and see if it could do this. I dont want to run anything too heavy on the Pi, as it will already be serving the 2 camera streams as well as taking to the 6HC and running NodeRed.