@mrehorstdmd Thank you for the detailed answer, I have seen these photos. Well, then I'll try, try, but honestly I'm already giving up a little... I get either a noisy printer or low rigidity, but all options are combined by ripples.

@mrehorstdmd It's a pity that we couldn't win. Most likely you are right and these servomotors do not have enough resolution, which is confirmed by the frequency of ripples. I've been messing with them for more than 3 weeks, but I've never found a way to beat this other than changing the kinematics or adding a gearbox. By the way, have you measured the frequency of the ripples increased by 3 times and decreased in amplitude?

@droftarts
Unfortunately, I don't communicate much on forums and I don't know what is better to show so as not to overload the message. They send photos, I will definitely watch your videos, in my case it is exactly the X and Y axes and the ripples are on them, since vertical stripes are observed.
Unfortunately, I don't know if there is a note or something like that, so that the image is under it and does not take up much space.

@droftarts Thank you for responding. I can't say that it's urgent, but maybe someone will respond and help. And so yes, I tried automatic adjustment, set the stiffness, changed the parameters (P01-03, P01-04), tried to manually adjust, but so far only ripples on the walls come out, which I really don't like.

@droftarts Thank you for the advice and for the user tag of such servos, I will try to stick to it. I'm currently using mks skipr, but I'm considering duet controller as an upgrade. But if it is necessary. At the moment, I have found few forums where there is any mention of these servos at all, and therefore I wanted to ask a question here. I still don't know how to set up the servos correctly in order to remove the ripples on the model.

Re: Testing servomotors in my printer... again.

Нашел довольно старую тему по подключению сервоприводов ihsv42 на 3д принтер. Сейчас столкнулся с проблемой ряби при использовании ihsv42 на моем 3д принтере. Может кто то сталкивался с таким? Как решили?

(Added by admin) Google Translate:
I found a rather old topic on connecting ihsv42 servos to a 3D printer. Now I'm facing a ripple problem when using ihsv42 on my 3D printer. Maybe someone has encountered this? How did you decide?