Panel duet not working
-
I have connected the 7 inch panel to the duet 2 wifi board. It was working for few seconds later,it shows as connecting and when I switch off and turned it on it went blank
. Also the duet wifi (the latest version) I unable to see in the wifi signal from the board as well
. -
Only thing I can add is that it seems that connecting means PanelDue isn't getting the expected response from the Duet Wifi; had the same thing happen due to the SD card not being recognized
Same issue as this: https://forum.duet3d.com/topic/2646/cannot-initialise-sd-card-0-card-is-unusable/6
With a functional SD card everything worked. Might I suggest connecting to USB and looking at the serial output from the Duet Wifi?
-
Thanks for your comment. I tired connecting it to usb with duet wifi 2 i am able to connect it to the network. But still the panel is not working.
-
I have updated the firmware in the panel it is working now, but i installed the PanelDue-5.0i-7.0i.bin. Is this the right version to use it along with duet 2 wifi (latest version). Seems like the setting are not the same.
-
Look at https://github.com/dc42/PanelDueFirmware/releases . It starts with "Choosing the correct firmware binary" .
