Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Dead PWM Fans

    Duet Hardware and wiring
    2
    2
    308
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Sakeyundefined
      Sakey
      last edited by

      Had a wire come lose mid print and i'm pretty sure I've fried the PWM fan 0 and 1.

      Setting them to manual to 100% didn't do anything and swapping them to PWM fan 02 everything seem to work (meaning its not the fans themselves).

      Took a picture of the chips and was wondering if this is the case (looks like they have marks on them) and what are my options?

      0_1543092250231_fe096271-ed2f-4438-954f-0dce3ee9bac5-image.png

      Cheers

      1 Reply Last reply Reply Quote 0
      • sigxcpuundefined
        sigxcpu
        last edited by

        https://duet3d.dozuki.com/Wiki/Connector_and_spare_part_numbers

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA