Error loading g-code
-
My core x and is working perfectly. Today when I tried to load a g-code I get this error message. I have no way to load any file and the card is not full, it has nothing.
You know how to solve it. Thanks.
Error: Failed to write to file. Drive may be full.
Error: Could not write upload data!
Error: Failed to delete file 0:/gcodes/pieza 2.gcodeuet 2 wifi.
Firmware version 1.21.
0_1538396003540_config.pdf -
Might be worth backing up the contents of your SD card and use the SD Association tool to format the card before replacing the contents and trying again:
https://www.sdcard.org/downloads/formatter_4/index.html
adavidm
-
@adavidm, thank you very much, I have formatted the card and put back a backup that was old and has returned to work.
