New version of webinterface shows "?"

[mickey30m]

Hi

i have update everything, the firmware and the webcontrol.
but in previous version i can select from a drop down some g codes. on top of the screen.

but now instead of show a arrow from dropdown i get a ?

and in the list editor i can not add some g codes to that dropdown.

are there more people that have this problem?

[Jacotheron]

In the latest stable version, the option to manually add the gcode was removed for an interface where it remembers what you have entered, allowing you to quickly run the commands again.

The question mark links to the Gcode Wiki, where it is explained how to use each gcode to get the right function.

Others have also previously noted this and had a debate. Ultimately I did not really use it before the new DWC, and still don't - I simply make macros for everything (even single line macros) - so I don't really have an opinion on whether it is better or worse.

[mickey30m]

Hi.

But i cannot select what i used before.

I used it all the time.
Maybe that we can select it with a option.

I also use macro. But for other things.

[Jacotheron]

It should compile the list since the update was performed.

[mickey30m]

@jacotheron but how can i use what is in the list

[zerspaner_gerd]

Write an initial letter, e.g. "M"

[mickey30m]

@zerspaner_gerd i will check tommorow because i dont get that input field on my phone

[mickey30m]

@zerspaner_gerd this works.
i will learn myself to use it like this