Y-Axis flipped on Delta
-
I converted my Tevo Little Monster to a Duet Wifi and all is well except for one part.
The prints are all mirrored.
I can disable Y axis inversion in Simplify3D but then my previews and STL files are wonky-looking.
I figure it has to have something to do with my tower setup and motor/endstop connections. Currently they are as shown on the top plate in the manual (from the top):
My brain is having some difficulty wrapping my head around the orientation and what needs to change. Do I just need to flip the "x" and "y" connectors and associated endstops?
-
@deadwood83 said in Y-Axis flipped on Delta:
Do I just need to flip the "x" and "y" connectors and associated endstops?
Yes.
