Caution when fitting a mount or adaptor to the 3 holes in the SE
-
So I redesigned Lykle/Zesty's Nimble holder for the smart effector. Unfortunately the early prototype version I was using did not quite have enough clearance for the large nut that holds the hotend in the z dimension. As such to get the adaptor to sit level, I had to tighten the bolts a little too much, this stiffens the smarteffector PCb, meaning it triggers less well.
So just a note of caution ensure the mount sits passively with a little tolerance to ensure it does not make your SE perform less well than it should.
Lykle's verison redesigned to avoid this problem - https://www.thingiverse.com/thing:2719039
Mine with nut trap for large nut - https://www.thingiverse.com/thing:2551302 -
Lykle had already redesigned that mount to raise the platform by 1mm due to this
-
Yes ignore this thread in fact I might delete it.
-
Am now trying this one instead: https://www.thingiverse.com/thing:2740387
As having the nut trap for the large nut is really useful.EDIT - seems to work okay. Sensitivity is normal.
