Resume working well.
-
So I'm documenting a build of a (I think) a world-first delta made inside a tube…
http://forums.reprap.org/read.php?178,802910
In order to position my linear rails I printed a scaffold on my kossel XL. Its 300mm x 385mm so the largest object I've printed. It showed a heater fault on the hotend after 16 hours, with about 45mm to go!
So I power cycled the machine, set the bed quickly back to normal temp, to keep the part adhered, fixed the loose connection on the hotend, then entered M916 and hit send. Resumed and finished.
Superb features, 17 hours and 250g of filament saved.
