This Duet 2 Wifi came with a Modix Printer I am trying to construct. I've been unable to get the wifi module to work. I would like to get it set up in access point mode so that I can access the web interface. I've run an m122 with the result below. === Diagnostics === RepRapFirmware for Duet 2 WiFi/Ethernet version 3.4.5 (2022-11-30 19:36:12) running on Duet WiFi 1.02 or later + DueX5v0.11 Board ID: 0JD0M-9X6JA-JUNSN-6JTDJ-3S46J-T9QMV Used output buffers: 1 of 26 (11 max) === RTOS === Static ram: 23836 Dynamic ram: 76044 of which 0 recycled Never used RAM 9344, free system stack 192 words Tasks: NETWORK(ready,7.4%,458) HEAT(notifyWait,0.0%,333) Move(notifyWait,0.0%,363) DUEX(notifyWait,0.0%,24) MAIN(running,92.5%,452) IDLE(ready,0.1%,30), total 100.0% Owned mutexes: USB(MAIN) === Platform === Last reset 00:14:07 ago, cause: power up Last software reset time unknown, reason: User, GCodes spinning, available RAM 9272, slot 2 Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0041f000 BFAR 0xe000ed38 SP 0x00000000 Task MAIN Freestk 0 n/a Error status: 0x00 Aux0 errors 0,0,0 Step timer max interval 0 MCU temperature: min 24.6, current 31.0, max 31.4 Supply voltage: min 0.5, current 1.7, max 1.8, under voltage events: 0, over voltage events: 0, power good: no Heap OK, handles allocated/used 99/9, heap memory allocated/used/recyclable 2048/136/4, gc cycles 0 Events: 0 queued, 0 completed Driver 0: ok, SG min n/a Driver 1: ok, SG min n/a Driver 2: ok, SG min n/a Driver 3: ok, SG min n/a Driver 4: ok, SG min n/a Driver 5: ok, SG min n/a Driver 6: ok, SG min n/a Driver 7: ok, SG min n/a Driver 8: ok, SG min n/a Driver 9: ok, SG min n/a Driver 10: Driver 11: Date/time: 1970-01-01 00:00:00 Cache data hit count 4294967295 Slowest loop: 99.82ms; fastest: 0.16ms I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0 === Storage === Free file entries: 10 SD card 0 detected, interface speed: 20.0MBytes/sec SD card longest read time 9.3ms, write time 0.0ms, max retries 0 === Move === DMs created 83, segments created 0, maxWait 0ms, bed compensation in use: none, comp offset 0.000 === MainDDARing === Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === AuxDDARing === Scheduled moves 0, completed 0, hiccups 0, stepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1 === Heat === Bed heaters -1 -1 -1 -1, chamber heaters -1 -1 -1 -1, ordering errs 0 === GCodes === Segments left: 0 Movement lock held by null HTTP is idle in state(s) 0 Telnet is idle in state(s) 0 File is idle in state(s) 0 USB is ready with "m122" in state(s) 0 Aux is idle in state(s) 0 Trigger is idle in state(s) 0 Queue is idle in state(s) 0 LCD is idle in state(s) 0 Daemon is idle in state(s) 0 Autopause is idle in state(s) 0 Code queue is empty === Filament sensors === Extruder 0 sensor: no data received === DueX === Read count 1, 0.07 reads/min === Network === Slowest loop: 1.02ms; fastest: 0.00ms Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) HTTP sessions: 0 of 8 = WiFi = Network state is disabled WiFi module is disabled Failed messages: pending 0, notready 0, noresp 0 Socket states: 0 0 0 0 0 0 0 0 ok

@ZekeAtWork What happens when you follow the instructions here: https://docs.duet3d.com/en/How_to_guides/Getting_connected/Getting_connected_to_your_Duet Please show the commands you are sending, and the response the Duet returns. You can copy and paste the text from YAT (or any other serial terminal you use) into you reply, which is preferable to screen shots. Ian

Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

Wifi module disabled - start timed out

Solved

Duet Web Control

650

undefined

ZekeAtWork @ZekeAtWork
last edited by

As it ended up, the supplier will be sending us a new mainboard to replace this one with the faulty WiFi module.
1 Reply Last reply
Reply Quote 0
undefined ZekeAtWork has marked this topic as solved

2 / 2