Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Heating speed control method_request

    Scheduled Pinned Locked Moved
    Tuning and tweaking
    2
    2
    106
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Dennis_kimundefined
      Dennis_kim
      last edited by

      The temperature rise of the heater is too slow
      Even if set after tuning with M303, it increases very slowly.
      When heated with an external power supply of 24V, it reaches 100 degrees in about 4 to 5 minutes, but when heated with Duet3, it takes about an hour.

      How can I increase the heating rate?

      M115
      FIRMWARE_NAME: RepRapFirmware for Duet 3 MB6HC FIRMWARE_VERSION: 3.4.0 ELECTRONICS: Duet 3 MB6HC v1.01 or later FIRMWARE_DATE: 2022-03-15 18:57:26
      PSU Votage = 24.0V

      Setting val
      ; Heaters
      M308 S0 P"temp0" Y"thermistor" T100000 B4138
      M950 H0 C"out0" T0
      M307 H0 R0.401 K1.093:0.000 D1.40 E1.35 S1.00 B0

      jay_s_ukundefined 1 Reply Last reply Reply Quote 0
      • jay_s_ukundefined
        jay_s_uk @Dennis_kim
        last edited by

        @Dennis_kim please don't duplicate post.
        I'm locking this thread. Please use the original https://forum.duet3d.com/topic/31888/heating-speed-control-method

        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

        1 Reply Last reply Reply Quote 0
        • jay_s_ukundefined jay_s_uk locked this topic
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA