DWC: thermistor and temperature of tool 0 are not displayed

[3DinoPrint]

Duet2Wifi
DWC: thermistor and temperature of tool0 (hotend) are not displayed:
Screenshot of DWC:

Heater part of config.g

[jay_s_uk]

@3DinoPrint run M98 P"config.g" and post the output

[gloomyandy]

@3DinoPrint Shouldn't that M563 tool definition include a heater, H1 perhaps?

[3DinoPrint]

@gloomyandy that works, thank you