IR Probe Mount for updated E3D v6
-
I made an IR Probe mount for the updated E3D v6 because most of the ones currently available will not fit, or have some design element to them that I did not like.
This one is designed to mount and give a Y offset of 16mm with 0 X axis offset.
Printed, and tested.
Hope it helps someone.
-
Very nice!
-
Nice mount.
I'm also glad to know I'm not the only one who has resorted to bodge fixing the E3D sock to my hotend! I use a thin strip of kapton tape but it was a PITA to get on…..
