When slecting Hotend heater 1 in dashboard error
-
@jay_s_uk Just found them.
; tpost0.g
; called after tool 0 has been selected
;
; generated by RepRapFirmware Configuration Tool v3.3.10 on Mon May 23 2022 12:52:37 GMT+0100 (British Summer Time)
; Wait for set temperatures to be reached
M116 P0; tpre0.g
; called before tool 0 is selected
;
; generated by RepRapFirmware Configuration Tool v3.3.10 on Mon May 23 2022 12:52:37 GMT+0100 (British Summer Time) -
@shaunppl what version of RRF are you running? It'll tell you in M115
What version of DWC are you running? It'll tell you under settings general -
@jay_s_uk Duet web control 3.4.0, FIRMWARE_NAME: RepRapFirmware for Duet 3 Mini 5+ FIRMWARE_VERSION: 3.2.2 ELECTRONICS: Duet 3 Mini5plus Ethernet FIRMWARE_DATE: 2021-02-11
-
@shaunppl theres your issue. you need to update your firmware to 3.4.0
Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is
-
@jay_s_uk Yep you are very right, have just uploaded the later firmware 3.4.0 and it worked, many thanks for your help.
-
@jay_s_uk Had to upgrade to the Mini 5+ as my maestro board keeps wiping the sd cards ? and making them unreadable.
So took all my settings with it, so scraching head to sort 3 axis homing and other issues etc, talk about having a bad day. lol
-
@shaunppl sounds like an issue with the sd card socket on the maestro then
Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is
-
@jay_s_uk Yeah i think so, but now worried as my other prototype are all on the maestro boards and 2 failures means i will have to probably move them all to duet 3 boards.
-
@jay_s_uk How are you getting on with your predator, I revamped mine with a rail conversion along with a meastro board and smart efficator made a hell of a difference.
-
@shaunppl good thanks. so far changed the belts, motors, motor pulleys, added rails, changed the motherboard, made my own magball rods, fitted a smart effector with direct extruder (LGX Lite) and fitted a dragon HF.
-
@jay_s_uk Yeah i am trialing the revo hotend with the upgraded smart efficator board (a lot more accurate and less prone to the vibration issues when bed levelling) and using a fixed mounted hemera extruder not the flying spring mounts, seems to be more stable and prints faster.
