Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Z homing issu whit endstop please help

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    56
    1.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • bartekpundefined
      bartekp @bartekp
      last edited by

      @bartekp ok i didt changes what to do next or deal with this bltouch
      ?

      bartekpundefined 1 Reply Last reply Reply Quote 0
      • bartekpundefined
        bartekp @bartekp
        last edited by

        @bartekp M98 P"config.g"
        HTTP is enabled on port 80
        FTP is disabled
        TELNET is disabled
        Error: Heater 3 not found
        Error: Unknown sensor type name "pt100000"
        Warning: Sensor number 1 has not been defined

        Error: Temperature reading fault on heater 1: unknown sensor

        jay_s_ukundefined 1 Reply Last reply Reply Quote 0
        • jay_s_ukundefined
          jay_s_uk @bartekp
          last edited by

          @bartekp can you post your full config.g

          Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

          bartekpundefined 1 Reply Last reply Reply Quote 0
          • bartekpundefined
            bartekp @jay_s_uk
            last edited by

            @jay_s_uk ; Configuration file for Duet WiFi (firmware version 3.3)
            ; executed by the firmware on start-up
            ;
            ; generated by RepRapFirmware Configuration Tool v3.3.3 on Mon Oct 04 2021 22:39:47 GMT+0200 (czas środkowoeuropejski letni)

            ; General preferences
            G90 ; send absolute coordinates...
            M83 ; ...but relative extruder moves
            M550 P"My Printer" ; set printer name
            M669 K1 ; select CoreXY mode

            ; Network
            M552 S1 ; enable network
            M586 P0 S1 ; enable HTTP
            M586 P1 S0 ; disable FTP
            M586 P2 S0 ; disable Telnet

            ; Drives
            M569 P0 S1 ; physical drive 0 goes forwards
            M569 P1 S1 ; physical drive 1 goes forwards
            M569 P2 S0 ; physical drive 2 goes forwards
            M569 P3 S0 ; physical drive 3 goes forwards
            M584 X0 Y1 Z2 E3 ; set drive mapping
            M350 Z16 E16 I0 ; configure microstepping without interpolation
            M350 X16 Y16 I1 ; configure microstepping with interpolation
            M92 X80.00 Y80.00 Z2756.00 E675.00 ; set steps per mm
            M566 X900.00 Y900.00 Z20.00 E600.00 ; set maximum instantaneous speed changes (mm/min)
            M203 X30000.00 Y30000.00 Z20.00 E6000.00 ; set maximum speeds (mm/min)
            M201 X5000.00 Y5000.00 Z10.00 E500.00 ; set accelerations (mm/s^2)
            M906 X800 Y800 Z800 E550 I30 ; set motor currents (mA) and motor idle factor in per cent
            M84 S30 ; Set idle timeout

            ; Axis Limits
            M208 X0 Y0 Z0 S1 ; set axis minima
            M208 X500 Y500 Z600 S0 ; set axis maxima

            ; Endstops
            M574 X1 S1 P"xstop" ; configure active-high endstop for low end on X via pin xstop
            M574 Y1 S1 P"ystop" ; configure active-high endstop for low end on Y via pin ystop
            M574 Z1 S1 P"zstop" ; configure active-high endstop for high end on Z via pin ^zstop

            ; Z-Probe
            M307 H3 A-1 C-1 D-1 ; disable heater on PWM channel for BLTouch
            M558 P9 C"^zprobe.in" H5 F100 T2000
            M950 S0 C"exp.heater3"
            G31 P500 X30 Y60 Z8 ; set Z probe trigger value, offset and trigger height
            M557 X15:315 Y15:315 S20 ; define mesh grid

            ; Heaters
            M308 S0 P"bedtemp" Y"thermistor" T100000 B4138 ; configure sensor 0 as thermistor on pin bedtemp
            M950 H0 C"bedheat" T0 ; create bed heater output on bedheat and map it to sensor 0
            M307 H0 B0 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit
            M140 H0 ; map heated bed to heater 0
            M143 H0 S120 ; set temperature limit for heater 0 to 120C
            M308 S1 P"e0temp" Y"pt100000" R4700 ; configure sensor 1 as PT1000 on pin e0temp
            M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1
            M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
            M143 H1 S280 ; set temperature limit for heater 1 to 280C

            ; Fans
            M950 F0 C"fan0" Q500 ; create fan 0 on pin fan0 and set its frequency
            M106 P0 S0 H-1 ; set fan 0 value. Thermostatic control is turned off
            M950 F1 C"fan1" Q500 ; create fan 1 on pin fan1 and set its frequency
            M106 P1 S1 H1 T45 ; set fan 1 value. Thermostatic control is turned on
            M950 F2 C"fan2" Q500 ; create fan 2 on pin fan2 and set its frequency
            M106 P2 S1 H1 T45 ; set fan 2 value. Thermostatic control is turned on

            ; Tools
            M563 P0 D0 H1 F0 ; define tool 0
            G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
            G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C

            ; Custom settings are not defined

            ; Miscellaneous
            T0 ; select first tool

            jay_s_ukundefined 1 Reply Last reply Reply Quote 0
            • jay_s_ukundefined
              jay_s_uk @bartekp
              last edited by 

              ; Configuration file for Duet WiFi (firmware version 3.3)
; executed by the firmware on start-up
;
; generated by RepRapFirmware Configuration Tool v3.3.3 on Mon Oct 04 2021 22:39:47 GMT+0200 (czas środkowoeuropejski letni)

; General preferences
G90 ; send absolute coordinates...
M83 ; ...but relative extruder moves
M550 P"My Printer" ; set printer name
M669 K1 ; select CoreXY mode

; Network
M552 S1 ; enable network
M586 P0 S1 ; enable HTTP
M586 P1 S0 ; disable FTP
M586 P2 S0 ; disable Telnet

; Drives
M569 P0 S1 ; physical drive 0 goes forwards
M569 P1 S1 ; physical drive 1 goes forwards
M569 P2 S0 ; physical drive 2 goes forwards
M569 P3 S0 ; physical drive 3 goes forwards
M584 X0 Y1 Z2 E3 ; set drive mapping
M350 Z16 E16 I0 ; configure microstepping without interpolation
M350 X16 Y16 I1 ; configure microstepping with interpolation
M92 X80.00 Y80.00 Z2756.00 E675.00 ; set steps per mm
M566 X900.00 Y900.00 Z20.00 E600.00 ; set maximum instantaneous speed changes (mm/min)
M203 X30000.00 Y30000.00 Z20.00 E6000.00 ; set maximum speeds (mm/min)
M201 X5000.00 Y5000.00 Z10.00 E500.00 ; set accelerations (mm/s^2)
M906 X800 Y800 Z800 E550 I30 ; set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout

; Axis Limits
M208 X0 Y0 Z0 S1 ; set axis minima
M208 X500 Y500 Z600 S0 ; set axis maxima

; Endstops
M574 X1 S1 P"xstop" ; configure active-high endstop for low end on X via pin xstop
M574 Y1 S1 P"ystop" ; configure active-high endstop for low end on Y via pin ystop
M574 Z1 S1 P"zstop" ; configure active-high endstop for high end on Z via pin ^zstop

; Z-Probe
M950 S0 C"exp.heater3"
M558 P9 C"^zprobe.in" H5 F100 T2000
G31 P500 X30 Y60 Z8 ; set Z probe trigger value, offset and trigger height
M557 X15:315 Y15:315 S20 ; define mesh grid

; Heaters
M308 S0 P"bedtemp" Y"thermistor" T100000 B4138 ; configure sensor 0 as thermistor on pin bedtemp
M950 H0 C"bedheat" T0 ; create bed heater output on bedheat and map it to sensor 0
M307 H0 B0 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit
M140 H0 ; map heated bed to heater 0
M143 H0 S120 ; set temperature limit for heater 0 to 120C
M308 S1 P"e0temp" Y"pt1000" R4700 ; configure sensor 1 as PT1000 on pin e0temp
M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1
M307 H1 B0 S1.00 ; disable bang-bang mode for heater and set PWM limit
M143 H1 S280 ; set temperature limit for heater 1 to 280C

; Fans
M950 F0 C"fan0" Q500 ; create fan 0 on pin fan0 and set its frequency
M106 P0 S0 H-1 ; set fan 0 value. Thermostatic control is turned off
M950 F1 C"fan1" Q500 ; create fan 1 on pin fan1 and set its frequency
M106 P1 S1 H1 T45 ; set fan 1 value. Thermostatic control is turned on
M950 F2 C"fan2" Q500 ; create fan 2 on pin fan2 and set its frequency
M106 P2 S1 H1 T45 ; set fan 2 value. Thermostatic control is turned on

; Tools
M563 P0 D0 H1 F0 ; define tool 0
G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C

; Custom settings are not defined

; Miscellaneous
T0 ; select first tool

              I've made a couple of tweaks. could you load that please?

              Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

              bartekpundefined 1 Reply Last reply Reply Quote 0
              • bartekpundefined
                bartekp @jay_s_uk
                last edited by

                @jay_s_uk 20.10.2021, 15:08:02

                Error: Temperature reading fault on heater 1: sensor open circuit
                20.10.2021, 15:08:00 M98 P"config.g"
                HTTP is enabled on port 80
                FTP is disabled
                TELNET is disabled

                bartekpundefined 1 Reply Last reply Reply Quote 0
                • bartekpundefined
                  bartekp @bartekp
                  last edited by

                  @bartekp what to do next

                  jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                  • jay_s_ukundefined
                    jay_s_uk @bartekp
                    last edited by

                    @bartekp does the probe display in that panel now?

                    Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                    bartekpundefined 1 Reply Last reply Reply Quote 0
                    • bartekpundefined
                      bartekp @jay_s_uk
                      last edited by

                      @jay_s_uk z probe 0

                      jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                      • jay_s_ukundefined
                        jay_s_uk @bartekp
                        last edited by

                        @bartekp is that with the bltouch extended or retracted?
                        Do M401 and M402 do anything?

                        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                        bartekpundefined 1 Reply Last reply Reply Quote 0
                        • bartekpundefined
                          bartekp @jay_s_uk
                          last edited by

                          @jay_s_ukdo nothing but no errors

                          bartekpundefined 1 Reply Last reply Reply Quote 0
                          • bartekpundefined
                            bartekp @bartekp
                            last edited by

                            @bartekp is retracted

                            jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                            • jay_s_ukundefined
                              jay_s_uk @bartekp
                              last edited by

                              @bartekp sounds like you need you check your wiring carefully (with the power off)

                              Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                              bartekpundefined 1 Reply Last reply Reply Quote 0
                              • bartekpundefined
                                bartekp @jay_s_uk
                                last edited by

                                @jay_s_uk can you tell me how should be connected to duet 2 ?
                                wifi

                                jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                                • jay_s_ukundefined
                                  jay_s_uk @bartekp
                                  last edited by

                                  @bartekp its described here https://duet3d.dozuki.com/Wiki/Connecting_a_Z_probe#Section_Duet_2_WiFi_Ethernet_without_expansion_board

                                  Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                                  bartekpundefined 1 Reply Last reply Reply Quote 0
                                  • bartekpundefined
                                    bartekp @jay_s_uk
                                    last edited by

                                    @jay_s_uk https://www.youtube.com/watch?v=T7oNioNt1AE

                                    bartekpundefined 1 Reply Last reply Reply Quote 0
                                    • bartekpundefined
                                      bartekp @bartekp
                                      last edited by

                                      @bartekp i have greean instead red line maybe i should change betwen green and yelow

                                      bartekpundefined 1 Reply Last reply Reply Quote 0
                                      • bartekpundefined
                                        bartekp @bartekp
                                        last edited by

                                        @bartekp I checked connection and evey line is ok

                                        jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                                        • jay_s_ukundefined
                                          jay_s_uk @bartekp
                                          last edited by

                                          @bartekp the creality BLTouch wire colours are here for reference
                                          https://forum.duet3d.com/topic/25598/bl-touch-on-duet3/6?_=1634733529379

                                          Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                                          bartekpundefined 1 Reply Last reply Reply Quote 0
                                          • bartekpundefined
                                            bartekp @jay_s_uk
                                            last edited by

                                            @jay_s_uk it look like i have good connected

                                            bartekpundefined 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA