problem with stringing

lui2004

Hi

i have problems to remove stringing.

I have an Ender5 with all metal hotend with Micro swiss DD

my Thermistor is a Semitec 104GT-2

my settings for Frimware retraction is:

M207 P0 S0.80 R0 F2100 T2100 Z0 ; Firmware Retraction

PLA Brand is German RepRap
Nozzle Temp: 195°C
Bed: 55°C

if you need some other configs tell it i will post it

thanks

Stephen6309

@lui2004 Increasing retraction distance and feed rate should help.

My E3DV6 on a BMG direct drive, I use: M207 S1.5 F6000 R0 Z0.03 ; firmware retraction

If you have a bowden, it needs more retraction distance, due to the slack in the tube.

lui2004

i have a Direct Drive from Micro Swiss

Stephen6309

@lui2004 Then you need to increase the retraction (S) and increase the feedrate (F) if needed. It appears the 0.80 retraction isn't enough.