Is there a script run for "Tool 0" ?
-
When I click on "Tool 0" on the DWC screen, what script if any is being run? I am wondering what all that button does.
-
@jens55 it sets tool 0 as the active tool. If you have only one, you can add "T0"at the end of config.g to enable it automatically at startup.
-
@mikes, thanks but I am trying to find out exactly what the button does. What is the equivalent Gcode? Is it "T0" or "T-1" followed by "T0" or something else? Is the function hard coded or is there a gcode file that it runs where I could change it's action ?
-
@jens55
It will send T0
That in turn may run other tool change macros.
See here
https://duet3d.dozuki.com/Wiki/Gcode#Section_T_Select_Tool -
@owend, thanks.
-
@owend said in Is there a script run for "Tool 0" ?:
See here
https://duet3d.dozuki.com/Wiki/Gcode#Section_T_Select_ToolAfter more studying and contemplation, this link proved to be the answer.
Thank you !
