Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Issue with updating firmware on new WIFI

    Scheduled Pinned Locked Moved
    General Discussion
    2
    3
    131
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • 3DPrintingWorldundefined
      3DPrintingWorld
      last edited by

      Brand new Wifi, I was able to connect to it with no issues thru WIFI but it was running some version of RRF 2 so I updated it to 3 without issues. Then I loaded the zip for 3.2 and it locked up. Now I can no longer connect thru WIFI.

      If I connect thru USB and send a M552 it says "WIFI is being started" with no other responses. If I send a M122 right after the M552 it still says "wifi module is disabled"

      jay_s_ukundefined 1 Reply Last reply Reply Quote 0
      • jay_s_ukundefined
        jay_s_uk @3DPrintingWorld
        last edited by

        @3dprintingworld you probably need to update the wifi firmware.
        If running 3.2.2 or below, put the newest duetwifiserver file in the sys folder. If running 3.3RC, put it in a folder called sys.
        Over USB run

        M552 S0
M997 S1
M552 S1

        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

        3DPrintingWorldundefined 1 Reply Last reply Reply Quote 1
        • 3DPrintingWorldundefined
          3DPrintingWorld @jay_s_uk
          last edited by 3DPrintingWorld

          Bingo! Thanks a kajillion!👍

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA