Z axis: ball screws vs belts
-
@mrehorstdmd said in Z axis: ball screws vs belts:
no extra wiring...
It was replaced with extra belting.
-
@o_lampe https://www.ebay.com/itm/Rino-Motorized-Rotary-Table-Stage-CNC-4th-Axis-Sherline-Milling-Engraver-Router/191714031261?epid=711126295&hash=item2ca30bf69d:g:A7UAAOSwPhdVB2f0
$108 shipped. You get the motor and worm drive already integrated. Compare that to the cost of a motor and brake, or buying a motor and separate gear box. This type seems to work fine, too, and can be bought via aliexpress in whatever country you're in: https://www.ebay.com/itm/NEMA17-Turbine-Worm-Gear-Stepper-motor-Hybrid-2-Phase-4-wires/324001642095?hash=item4b7000b66f:g:HTMAAOSwEGVd50j1@zapta Yes, belts instead of wires and connectors. How often have you heard of wiring problems vs how often have you heard of belts failing? I suppose ineptitude in wiring can translate to ineptitude in mechanics, so they're probably even by that measure.
-
@mrehorstdmd said in Z axis: ball screws vs belts:
How often have you heard of wiring problems vs how often have you heard of belts failing?
Chances are your printer has many more wires than belts so more room for failure.
BTW, I just started to collect parts for a Voron V2.4. If I got it correctly, the design has 8 (eight) belts and 16 puleys/idlers just for the Z movement, so belting can be fun.
-
I went the other route, with belts and counterweights...
1 kilo per belt.
Works nicely, no more falling without power.
I used brake cable for bike with wheels because the tubing had too much friction. -
It seems that belted Z is gaining traction in the desktop 3D printers world. For example, the Voron Switchwire, a bed slinger, uses a coreXY configuration for the X/Z plane, and then, not to mention the deltas.
-
@zapta Wow! 8 belts to move Z! That's terrific, but wouldn't 10 be even better?
@tech-raton It's got a very steam-punk look to it!
-
Does small gaz cylinders exist, like for car rear tail-board?
-
The tubing isn't copper in my watercooling, but it will be...
But i need to find a way to solve the galvanic corrosion.
@fma said in Z axis: ball screws vs belts:
Does small gaz cylinders exist, like for car rear tail-board?
Yep, you can find these in any length, but their power is different along the length.
Think of them like a spring. -
@tech-raton said in Z axis: ball screws vs belts:
But i need to find a way to solve the galvanic corrosion.
Why not take brass instead? That's ~70% copper, without corrosion.
-
Copper tubing is easier to find than brass tube...
