Wierd one with Paneldue pause resume
-
im running rrf 3.2.2 on my duet3,
if i start a print at 80mm/s (100%) from DWC, then go to the printer and increase to 200% via the paneldue (should now be 160mm/s.
I then press pause on the paneldue and then resume again, its like its now treating the 160mm/s as 100% but as the paneldue is still set at 200 it flys at around 320mm/s
ive tested this multiple times today and it does this every time.any ideas if im doing something wrong or is it a bug ?