Large format print bed mesh level display question

madeinta1wan

That's the heightmap for our printer which has a 2895mm long print bed, while there are plenty of considerations to sorting out the level-ness (do I pour as level a concrete base as I can, etc) I wanted to see if anyone knows if there's a way to edit the boundary conditions of the heightmap display?

Because I've got a long rectangular bed it seems to squish the plot of heightmap.csv into a square.

Thanks

Nate

Veti

how many z motors do you have?

using this is easy if you have more than one
https://duet3d.dozuki.com/Wiki/Bed_levelling_using_multiple_independent_Z_motors

madeinta1wan

@Veti said in Large format print bed mesh level display question:

https://duet3d.dozuki.com/Wiki/Bed_levelling_using_multiple_independent_Z_motors

I've got two, I'll go through this now.

Thanks @Veti