Mag balls and rod ends
-
Hi all,
I'm looking to get a set of mag balls and rod ends for a smart effector based delta - as it's a large format I've already got the carbon fibre ready (rods will measure 515mm center to center) so just need the magnetic parts. Is there any UK stocks of these anywhere or should I shout out to Haydn?
Thanks in advance
Colin
-
@SlimShader Haydn's are the best. You might find the odd stockist for his rods in the UK (such as Duet3D) but they only stock standard sizes.
Best to contact him directly -
@SlimShader i made my custom lenght magnetic arms and i ordered the magnets and the delrin housing from Haydn Huntley itself!
-
-
A cheaper alternative that i have had success with https://www.thingiverse.com/thing:2786499
-
Thanks all for the comments! I already built rods with Traxxis ends for now, but as I'm planning multiple tools for this printer I want to move to a magnetic system.
I'll reach out to Haydn about buying the balls for the effector and hopefully Delrin rod ends suitable for 8mm rods.
