Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    BLTouch Zprobe marche pas

    Scheduled Pinned Locked Moved Solved
    Firmware installation
    2
    50
    1.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Phaedruxundefined
      Phaedrux Moderator @chris974M
      last edited by

      @chris974M said in BLTouch Zprobe marche pas:

      ; Z-Probe
      M950 S0

      This is wrong. It should be M950 S0 C"duex.pwm5"

      Z-Bot CoreXY Build | Thingiverse Profile

      chris974Mundefined 1 Reply Last reply Reply Quote 0
      • chris974Mundefined
        chris974M @Phaedrux
        last edited by

        @Phaedrux j'ai corriger toujours rien

        1 Reply Last reply Reply Quote 0
        • chris974Mundefined
          chris974M
          last edited by

          ; Configuration file for Duet WiFi (firmware version 3)
          ; executed by the firmware on start-up
          ;
          ; generated by RepRapFirmware Configuration Tool v3.1.4 on Sat Oct 03 2020 15:26:33 GMT+0200 (heure d’été d’Europe centrale)

          ; General preferences
          G90 ; send absolute coordinates...
          M83 ; ...but relative extruder moves
          M550 P"MonsterPrinter" ; set printer name

          ; Network
          M552 S1 ; enable network
          M586 P0 S1 ; enable HTTP
          M586 P1 S0 ; disable FTP
          M586 P2 S0 ; disable Telnet

          ; Drives
          M569 P0 S1 ; physical drive 0 goes forwards
          M569 P1 S0 ; physical drive 1 goes forwards
          M569 P2 S1 ; physical drive 2 goes forwards
          M569 P3 S1 ; physical drive 3 goes forwards
          M569 P5 S1 ; physical drive 5 goes forwards
          M569 P6 S1 ; physical drive 6 goes forwards
          M569 P7 S0 ; physical drive 7 goes forwards
          M584 X0:5 Y1:6 Z2:7 E3 ; set drive mapping
          M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
          M92 X100.00 Y80.00 Z400.00 E420.00 ; set steps per mm
          M566 X900.00 Y1400.00 Z12.00 E120.00 ; set maximum instantaneous speed changes (mm/min)
          M203 X9000.00 Y9000.00 Z180.00 E1200.00 ; set maximum speeds (mm/min)
          M201 X500.00 Y500.00 Z20.00 E250.00 ; set accelerations (mm/s^2)
          M906 X800 Y1950 Z1400 E800 I30 ; set motor currents (mA) and motor idle factor in per cent
          M84 S30 ; Set idle timeout

          ; Axis Limits
          M208 X-6 Y-10 Z0 S1 ; set axis minima
          M208 X780 Y510 Z350 S0 ; set axis maxima

          ; Endstops
          M574 X1 S1 P"xstop" ; configure active-high endstop for low end on X via pin xstop
          M574 Y2 S1 P"ystop" ; configure active-high endstop for high end on Y via pin ystop
          M574 Z1 S2 ; configure Z-probe endstop for low end on Z

          ; Z-Probe
          M950 S0 C "duex.pwm5" ; créer la broche servo 0 pour BLTouch
          M558 P9 C"^zprobe.in" H5 F120 T6000 ; set Z probe type to bltouch and the dive height + speeds
          G31 P500 X0 Y20 Z3.71 ; set Z probe trigger value, offset and trigger height
          M557 X40:780 Y80:510 S100 ; define mesh grid

          ; Heaters
          M308 S0 P"bedtemp" Y"thermistor" T100000 B3950 ; configure sensor 0 as thermistor on pin bedtemp
          M950 H0 C"bedheat" T0 ; create bed heater output on bedheat and map it to sensor 0
          M307 H0 B0 S1.00 ; disable bang-bang mode for the bed heater and set PWM limit
          M140 H0 ; map heated bed to heater 0
          M143 H0 S150 ; set temperature limit for heater 0 to 150C
          M305 P1 T4606017 B5848 C5.548428e-8 R4700 H0 L0
          M308 S1 P"e0temp" Y"thermistor" T4606017 B5848 ; configure sensor 1 as thermistor on pin e0temp
          M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1
          M307 H1 A580.4 C256.6 D6.4 S0.50 ; disable bang-bang mode for heater and set PWM limit
          M143 H1 S493
          ; Fans
          M950 F0 C"fan0" Q500 ; create fan 0 on pin fan0 and set its frequency
          M106 P0 S0 H-1 ; set fan 0 value. Thermostatic control is turned off
          M950 F1 C"fan1" Q500 ; create fan 1 on pin fan1 and set its frequency
          M106 P1 S1 H1 T45 ; set fan 1 value. Thermostatic control is turned on

          ; Tools
          M563 P0 D0 H1 F0 ; define tool 0
          G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
          G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C

          ; Custom settings are not defined

          ; Miscellaneous
          M911 S10 R11 P"M913 X0 Y0 G91 M83 G1 Z3 E-5 F1000" ; set voltage thresholds and actions to run on power loss

          Phaedruxundefined 1 Reply Last reply Reply Quote 0
          • Phaedruxundefined
            Phaedrux Moderator
            last edited by

            Try M950 S0 C"!duex.pwm5"

            Z-Bot CoreXY Build | Thingiverse Profile

            chris974Mundefined 1 Reply Last reply Reply Quote 0
            • chris974Mundefined
              chris974M @Phaedrux
              last edited by

              @Phaedrux not work

              1 Reply Last reply Reply Quote 0
              • chris974Mundefined
                chris974M
                last edited by

                G28
                Error: Z probe was not triggered during probing move
                Error: Homing failed

                1 Reply Last reply Reply Quote 0
                • Phaedruxundefined
                  Phaedrux Moderator
                  last edited by Phaedrux

                  Does the BLTouch do a self test on power up with the pin deploying correctly?

                  Check your wiring for continuity.

                  Are you sure you are connected to Duex5 PWM5?

                  Can you try PWM1 instead?

                  Z-Bot CoreXY Build | Thingiverse Profile

                  chris974Mundefined 1 Reply Last reply Reply Quote 0
                  • chris974Mundefined
                    chris974M @Phaedrux
                    last edited by

                    @Phaedrux said in BLTouch Zprobe marche pas:

                    Does the BLTouch do a self test on power up with the pin deploying correctly?
                    Yes
                    My wiring is perfect
                    yesterday i check that before the maj and he is working corrct

                    1 Reply Last reply Reply Quote 0
                    • Phaedruxundefined
                      Phaedrux Moderator
                      last edited by

                      Can you please send M122 and report the results.
                      Also send M98 P"config.g" and report the results.

                      Z-Bot CoreXY Build | Thingiverse Profile

                      1 Reply Last reply Reply Quote 0
                      • chris974Mundefined
                        chris974M
                        last edited by

                        @Phaedrux said in BLTouch Zprobe marche pas:

                        M122

                        M122
                        === Diagnostics ===
                        RepRapFirmware for Duet 2 WiFi/Ethernet version 3.1.1 running on Duet WiFi 1.02 or later + DueX5
                        Board ID: 08DLM-996RU-N8PS4-6JKD8-3S06T-KBVRN
                        Used output buffers: 1 of 24 (10 max)
                        === RTOS ===
                        Static ram: 27980
                        Dynamic ram: 94224 of which 44 recycled
                        Exception stack ram used: 264
                        Never used ram: 8560
                        Tasks: NETWORK(ready,416) HEAT(blocked,1224) DUEX(suspended,160) MAIN(running,1824) IDLE(ready,80)
                        Owned mutexes: WiFi(NETWORK)
                        === Platform ===
                        Last reset 00:01:17 ago, cause: software
                        Last software reset at 2020-10-08 00:05, reason: User, spinning module GCodes, available RAM 8560 bytes (slot 1)
                        Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task MAIN
                        Error status: 0
                        MCU temperature: min 23.8, current 24.4, max 24.9
                        Supply voltage: min 24.1, current 24.2, max 24.4, under voltage events: 0, over voltage events: 0, power good: yes
                        Driver 0: standstill, SG min/max not available
                        Driver 1: standstill, SG min/max not available
                        Driver 2: standstill, SG min/max not available
                        Driver 3: standstill, SG min/max not available
                        Driver 4: standstill, SG min/max not available
                        Driver 5: standstill, SG min/max not available
                        Driver 6: standstill, SG min/max not available
                        Driver 7: standstill, SG min/max not available
                        Driver 8: standstill, SG min/max not available
                        Driver 9: standstill, SG min/max not available
                        Date/time: 2020-10-08 00:07:10
                        Cache data hit count 133234046
                        Slowest loop: 5.10ms; fastest: 0.12ms
                        I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
                        === Storage ===
                        Free file entries: 10
                        SD card 0 detected, interface speed: 20.0MBytes/sec
                        SD card longest read time 3.5ms, write time 0.0ms, max retries 0
                        === Move ===
                        Hiccups: 0(0), FreeDm: 169, MinFreeDm: 169, MaxWait: 0ms
                        Bed compensation in use: none, comp offset 0.000
                        === MainDDARing ===
                        Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: -1
                        === AuxDDARing ===
                        Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: -1
                        === Heat ===
                        Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
                        === GCodes ===
                        Segments left: 0
                        Movement lock held by null
                        HTTP is ready with "M122 " in state(s) 0
                        Telnet is idle in state(s) 0
                        File is idle in state(s) 0
                        USB is idle in state(s) 0
                        Aux is idle in state(s) 0
                        Trigger is idle in state(s) 0
                        Queue is idle in state(s) 0
                        Daemon is idle in state(s) 0
                        Autopause is idle in state(s) 0
                        Code queue is empty.
                        === Network ===
                        Slowest loop: 15.65ms; fastest: 0.00ms
                        Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions
                        HTTP sessions: 1 of 8

                        • WiFi -
                          Network state is active
                          WiFi module is connected to access point
                          Failed messages: pending 0, notready 0, noresp 0
                          WiFi firmware version 1.23
                          WiFi MAC address f4:cf:a2:66:94:6a
                          WiFi Vcc 3.43, reset reason Unknown
                          WiFi flash size 4194304, free heap 26096
                          WiFi IP address 192.168.1.122
                          WiFi signal strength -57dBm, reconnections 0, sleep mode modem
                          Socket states: 0 0 0 0 0 0 0 0
                          === DueX ===
                          Read count 1, 0.77 reads/min
                        1 Reply Last reply Reply Quote 0
                        • chris974Mundefined
                          chris974M
                          last edited by

                          @Phaedrux said in BLTouch Zprobe marche pas:

                          M98

                          M98 P"config.g"
                          HTTP is enabled on port 80
                          FTP is disabled
                          TELNET is disabled
                          Warning: Heater 0 appears to be over-powered. If left on at full power, its temperature is predicted to reach 365C
                          Error: M305 has been replaced by M308 and M950 in RepRapFirmware 3
                          Warning: Heater 1 appears to be over-powered. If left on at full power, its temperature is predicted to reach 605C

                          1 Reply Last reply Reply Quote 0
                          • Phaedruxundefined
                            Phaedrux Moderator @chris974M
                            last edited by

                            @chris974M said in BLTouch Zprobe marche pas:

                            M305 P1 T4606017 B5848 C5.548428e-8 R4700 H0 L0

                            Remove that line, though it's not related to the bltouch issue.

                            Are you able to try PWM1?

                            Z-Bot CoreXY Build | Thingiverse Profile

                            1 Reply Last reply Reply Quote 0
                            • chris974Mundefined
                              chris974M
                              last edited by

                              ok i try

                              1 Reply Last reply Reply Quote 0
                              • chris974Mundefined
                                chris974M
                                last edited by

                                que faut il que je change pour PWM1

                                1 Reply Last reply Reply Quote 0
                                • chris974Mundefined
                                  chris974M
                                  last edited by

                                  Example 4 (BLTouch on Duet WiFi) - old code:

                                  M558 P9 H5 F120 T3000 ; BLTouch connected to Z probe IN pin
                                  M307 H3 A-1 C-1 D-1 ; free up heater 3 to use as BLTouch servo pin
                                  ...
                                  M280 P3 S10 I1 ; send control signal to BLTouch through heater 3 pin
                                  New code:

                                  M558 P9 C"^zprobe.in" H5 F120 T3000 ; BLTouch connected to Z probe IN pin
                                  M950 S0 C"exp.heater3" ; create servo/gpio 0 on heater 3 pin on expansion connector
                                  ...
                                  M280 P0 S10 ; send control signal to BLTouch through servo/gpio 0

                                  1 Reply Last reply Reply Quote 0
                                  • chris974Mundefined
                                    chris974M
                                    last edited by

                                    M558 P9 C "^ zprobe.in " H5 F120 T3000; BLTouch connecté à la sonde Z IN pin
                                    M950 S0 C "duex.pwm1"; créer servo / gpio 0 sur l'élément chauffant 3 broches sur le connecteur d'extension
                                    ...
                                    M280 P0 S10; envoyer un signal de commande à BLTouch via servo / gpio 0

                                    Like that or nope

                                    Phaedruxundefined 1 Reply Last reply Reply Quote 0
                                    • chris974Mundefined
                                      chris974M
                                      last edited by

                                      Avertissement: le réchauffeur 0 semble être suralimenté. S'il est laissé allumé à pleine puissance, sa température devrait atteindre 365 ° C.
                                      Avertissement: le réchauffeur 1 semble être suralimenté. S'il est laissé allumé à pleine puissance, sa température devrait atteindre 605 ° C

                                      is it normal ?

                                      Phaedruxundefined 1 Reply Last reply Reply Quote 0
                                      • Phaedruxundefined
                                        Phaedrux Moderator @chris974M
                                        last edited by

                                        @chris974M said in BLTouch Zprobe marche pas:

                                        Avertissement: le réchauffeur 0 semble être suralimenté. S'il est laissé allumé à pleine puissance, sa température devrait atteindre 365 ° C.
                                        Avertissement: le réchauffeur 1 semble être suralimenté. S'il est laissé allumé à pleine puissance, sa température devrait atteindre 605 ° C

                                        is it normal ?

                                        Yes. https://duet3d.dozuki.com/Wiki/FAQ#Section_M307_Heater_1_appears_to_be_over_powered_If_left_on_at_full_power_its_temperature_is_predicted_to_reach_521C

                                        Z-Bot CoreXY Build | Thingiverse Profile

                                        1 Reply Last reply Reply Quote 0
                                        • Phaedruxundefined
                                          Phaedrux Moderator @chris974M
                                          last edited by

                                          @chris974M said in BLTouch Zprobe marche pas:

                                          M558 P9 C "^ zprobe.in " H5 F120 T3000; BLTouch connecté à la sonde Z IN pin
                                          M950 S0 C "duex.pwm1"; créer servo / gpio 0 sur l'élément chauffant 3 broches sur le connecteur d'extension
                                          ...
                                          M280 P0 S10; envoyer un signal de commande à BLTouch via servo / gpio 0

                                          Like that or nope

                                          Yes it should be like that.

                                          Z-Bot CoreXY Build | Thingiverse Profile

                                          1 Reply Last reply Reply Quote 0
                                          • chris974Mundefined
                                            chris974M
                                            last edited by

                                            @Phaedrux said in BLTouch Zprobe marche pas:

                                            duex.pwm

                                            M280 before or after the line G31

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA