Smart effector and duet wifi wiring

carfnann

Hello there

Juste received all the stuff to implement a smart effector on my duet wifi.
But I didn’t found any wiring schema between effector and duet wifi.
Is there any one to help me?

Thanks

Carlo

@carfnann
https://duet3d.dozuki.com/Wiki/Smart_effector_and_carriage_adapters_for_delta_printer

carfnann

Thanks I've seen that but I'm not sure where to link with the duet wifi...
2 x 3 pin black Molex with H+ HF+ PF+ is ok but I have some doubt what to wire for the 8-way white Molex

Veti

the 4 wire go to the z probe connector.
if you are using a pt100 2 / 4 wires go to the pt100 daugtherboard

edit forgot: if using a thermistor. then configure for 2 wire and go to the thermistor instead