Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    "Bad reply format version." Not sure how to proceed.

    Scheduled Pinned Locked Moved
    General Discussion
    6
    37
    1.6k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • itslikebooundefined
      itslikeboo @Veti
      last edited by

      @Veti Just wanted to thank you for helping walk me through this.

      I grabbed the Duet2Firmware-2.05.1.zip file from https://github.com/Duet3D/RepRapFirmware/releases/tag/2.05.1

      Copied the:

      Duet2CombinedFirmware.bin
      DuetWiFiServer.bin
      iap4e.bin

      into the sys directory on the sd card and replaced it into the board. Hooked up and connected to pronterface with the same messages in the console unfortunately.

      1 Reply Last reply Reply Quote 0
      • Vetiundefined
        Veti
        last edited by

        now run M997 S1 again

        itslikebooundefined 1 Reply Last reply Reply Quote 0
        • itslikebooundefined
          itslikeboo @Veti
          last edited by

          @Veti same as before

          >>> M997 S1
SENDING:M997 S1
WiFi reported error: no known networks found
WiFi module is idle
Trying to connect at 230400 baud:
 success
Erasing 4096 bytes...
Erasing 212992 bytes...
Uploading file...
5% complete
10% complete
15% complete
20% complete
25% complete
30% complete
35% complete
40% complete
45% complete
50% complete
55% complete
60% complete
65% complete
70% complete
75% complete
80% complete
85% complete
90% complete
95% complete
Upload successful
WiFi module started
ok T0:27.7 /0.0 B:27.1 /0.0
WiFi reported error: no known networks found
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
>>> M587
SENDING:M587
M587: Failed to retrieve network list
Error retrieving WiFi status message: bad reply format version
[ERROR] Error retrieving WiFi status message: bad reply format version

WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
WiFi reported error: no known networks found

          I''m still not convinced this isn't pure user error on my end, I just don't know how to diagnose it.

          1 Reply Last reply Reply Quote 0
          • itslikebooundefined
            itslikeboo
            last edited by

            I did it once more and when I gave the M587 command, it displayed the network. But then when I gave it again, back to the error.

            SENDING:M587
Remembered networks:
"SSID"=0.0.0.0 GW=0.0.0.0 NM=0.0.0.0
WiFi reported error: no known networks found
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
>>> M587
SENDING:M587
M587: Failed to retrieve network list
Error retrieving WiFi status message: bad reply format version
[ERROR] Error retrieving WiFi status message: bad reply format version

WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
>>> M587
SENDING:M587
M587: Failed to retrieve network list
Error retrieving WiFi status message: bad reply format version
[ERROR] Error retrieving WiFi status message: bad reply format version
            1 Reply Last reply Reply Quote 0
            • Vetiundefined
              Veti
              last edited by

              configure your network again

              M552 S0
              M587 S"your ssid" P"your password"
              M552 S1

              1 Reply Last reply Reply Quote 0
              • itslikebooundefined
                itslikeboo
                last edited by 

                >>> M552 S0
SENDING:M552 S0
ok T0:27.4 /0.0 B:27.0 /0.0
ok T0:27.4 /0.0 B:27.0 /0.0
>>> M587 S"the ssid" P"the password"
SENDING:M587 S"the ssid" P"the password"
ok T0:27.3 /0.0 B:27.0 /0.0
>>> M552 S1
SENDING:M552 S1
WiFi reported error: no known networks found
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle
ok T0:27.3 /0.0 B:27.0 /0.0

                Looks like it goes in and out or something.

                1 Reply Last reply Reply Quote 0
                • Vetiundefined
                  Veti
                  last edited by

                  just to make sure that its not a problem with the remembered networks

                  send
                  M588 S"*"

                  and do
                  M552 S0
                  M587 S"your ssid" P"your password"
                  M552 S1
                  again.

                  also does your network or password contain any special characters?

                  1 Reply Last reply Reply Quote 0
                  • itslikebooundefined
                    itslikeboo
                    last edited by

                    M588 gives:

                    >>> M588 S"*"
SENDING:M588 S"*"
M588: Failed to reset the WiFi module to factory settings
Error retrieving WiFi status message: bad reply format version
[ERROR] Error retrieving WiFi status message: bad reply format version

WiFi module is idle
WiFi reported error: no known networks found

                    Network name contains a hyphen and underscore.

                    A Former User? 1 Reply Last reply Reply Quote 0
                    • Vetiundefined
                      Veti
                      last edited by

                      can you temporarily make your wifi network unencrypted and try again?

                      1 Reply Last reply Reply Quote 0
                      • itslikebooundefined
                        itslikeboo
                        last edited by

                        I don't think I'll be able to do that, at least for a little bit. There are some people on the network.

                        I'm not sure why the wifi module won't reset. That command has worked before. When I connect to pronterface and get

                        "ok T0:26.7 /0.0 B:26.7 /0.0"

                        every now and then before jumping back to

                        "WiFi reported error: no known networks found
                        WiFi module is idle"

                        does this indicate a hardware problem?
                        I'm not sure if it's related but this version of the board has the external antenna. Also if it's of any help, when I first configured the board for RepRapFirmware 3, I couldn't get the DIAG pin to turn off. Not sure if it's relevant.

                        Vetiundefined 1 Reply Last reply Reply Quote 0
                        • Vetiundefined
                          Veti @itslikeboo
                          last edited by

                          @itslikeboo said in "Bad reply format version." Not sure how to proceed.:

                          "ok T0:26.7 /0.0 B:26.7 /0.0"

                          that is just temperature status.

                          there is a problem with the wifi has problems connecting to modern routers
                          https://forum.duet3d.com/topic/18423/the-problem-of-connecting-duetwifi-to-modern-routers/21?_=1599414409200

                          1 Reply Last reply Reply Quote 0
                          • itslikebooundefined
                            itslikeboo
                            last edited by

                            Interesting. Well that would suck. I'll try to look into it. Maybe late tonight I'll mess with the network. But wouldn't an M588 S"*" command still work? I've never even connected to the network once.

                            1 Reply Last reply Reply Quote 0
                            • A Former User?
                              A Former User @itslikeboo
                              last edited by

                              M588: Failed to reset the WiFi module to factory settings

                              it sometimes helps to reset the wifi module with M552 S-1 M552 S0 before M558 and before M557

                              itslikebooundefined 2 Replies Last reply Reply Quote 0
                              • itslikebooundefined
                                itslikeboo @A Former User
                                last edited by

                                @bearer Ok, thanks, I'll give it a try

                                1 Reply Last reply Reply Quote 0
                                • itslikebooundefined
                                  itslikeboo @A Former User
                                  last edited by

                                  @bearer Awesome, well that seemed to do something.

                                  >>> M552 S-1
SENDING:M552 S-1
WiFi module stopped
ok T0:25.1 /0.0 B:25.8 /0.0
>>> M552 S0
SENDING:M552 S0
WiFi module started
ok T0:25.1 /0.0 B:25.8 /0.0
>>> M588 S"*"
SENDING:M588 S"*"
ok T0:25.0 /0.0 B:25.8 /0.0
>>> M587 S"ssid" P"password"
SENDING:M587 S"ssid" P"password"
ok T0:25.0 /0.0 B:25.8 /0.0

                                  I've been here for so long, I'm not sure what to do now.

                                  1 Reply Last reply Reply Quote 0
                                  • A Former User?
                                    A Former User
                                    last edited by

                                    M552 S1 should turn on wifi and you should be good?

                                    (M552 S1 is all you need in config.g as well)

                                    itslikebooundefined 1 Reply Last reply Reply Quote 0
                                    • itslikebooundefined
                                      itslikeboo @A Former User
                                      last edited by

                                      @bearer

                                      >>> M552 S1
SENDING:M552 S1
WiFi reported error: no known networks found
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle

                                      Shoot me

                                      1 Reply Last reply Reply Quote 0
                                      • A Former User?
                                        A Former User
                                        last edited by

                                        While i go get the 6.5x55mm rounds from the safe try M557 one more time with the M552 S-1 M552 S0 before it, and give it a few seconds between each command.

                                        itslikebooundefined 1 Reply Last reply Reply Quote 0
                                        • itslikebooundefined
                                          itslikeboo @A Former User
                                          last edited by itslikeboo

                                          @bearer

                                          >>> M552 S-1
SENDING:M552 S-1
WiFi module stopped
ok T0:24.7 /0.0 B:25.5 /0.0
ok T0:24.7 /0.0 B:25.5 /0.0
ok T0:24.7 /0.0 B:25.5 /0.0
>>> M552 S0
SENDING:M552 S0
WiFi module started
ok T0:24.7 /0.0 B:25.5 /0.0
ok T0:24.7 /0.0 B:25.5 /0.0
ok T0:24.7 /0.0 B:25.5 /0.0
>>> M587 S"ssid" P"password"
SENDING:M587 S"ssid" P"password"
ok T0:24.6 /0.0 B:25.5 /0.0
ok T0:24.6 /0.0 B:25.5 /0.0
ok T0:24.6 /0.0 B:25.5 /0.0
>>> M552 S1
SENDING:M552 S1
WiFi reported error: no known networks found
WiFi module is idle
WiFi reported error: no known networks found
WiFi module is idle

                                          😁 it was worth a try.

                                          Not sure what to do now

                                          A Former User? 1 Reply Last reply Reply Quote 0
                                          • A Former User?
                                            A Former User @itslikeboo
                                            last edited by

                                            Not sure what to do now

                                            duck .. ¯_(ツ)_/¯

                                            which terminal are you using and are you typing or pasting commands?

                                            itslikebooundefined 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA