Modified BLV cube
-
Very cool! I think I've seen your design on Thingiverse before.
I recently built a BLV cube kit, and am in the process of doing some modifications -- changing to blind joints for the main frame members, fully enclosing it, and adding a third Z axis and kinematic bed for automatic leveling.
The project has slowed down a bit as some other things have taken priority in recent weeks (and my new Keenovo bed heater has languished in a shipping center in Shanghai), but looking forward to moving things forward soon.
I really like your front panel! Is that your design as well? I decided to swap out to a cheapo 7" tablet connected to DWC and am still thinking about the new front panel design...
-
@whopping-pochard
Thanks! Though it's not my design, I just modified it...
I understand waiting for parts to sit in a warehouse for weeks. A lot of my parts went through the same ordeal, some taking more than a month!I do like the kinematic bed leveling system, might have to put it on the list of upgrades.
Yes, the front panel is my design. I made it for a cheap 7" touchscreen from ebay, and printed it in three pieces. If you want, I can share the design.
-
@SAtech said in Modified BLV cube:
If you want, I can share the design.
That would be awesome, I'd love to see it!
-
The kinematic mount doesn't look right to me, but maybe I can't see details in the picture you posted. It looks like there are 3 parallel slots. That isn't how to make a kinematic mount...
-
@mrehorstdmd yeah, that’s a super zoomed out view... the actual couplings are based on I think your design, with one being effectively a ball joint, one a sliding joint, and one able to translate in X and Y. The slider joint translates along an axis intersecting with the ball joint.
-
@whopping-pochard That sounds right. nevermind.
-
Nice printer shame about the wiring.
-
HI Guys,
Does anyone have a link to the files for the front panel?
I think it just looks amazing.
Dizzwold.
-
What's supporting the bulge of the front panel where the paneldue is? I can see there are 4 screw holes here. 2 on the front, and 2 on the top. Have you printed some 40mm supports or used additional 2020 extrusion.
Also, do you have anything covering the back of the front panel?
Do you have any additional photos.
-
@satech Do you have a fusion file for the front panel?
