Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Faster trigger of M80 command with duet3 + SBC

    Scheduled Pinned Locked Moved Unsolved
    Duet Hardware and wiring
    1
    1
    96
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • nrivieraundefined
      nriviera
      last edited by

      Is there a faster was of triggering an M80 command from boot? All the power for my printer is powered through an SSR that has a bypass switch to allow the system to boot then an M80 command in the config.g keeps the power on. Before my Duet2 died this would be a quick button press but currently I need to hold power for 30s before the Pi boots. I had a config.g file on the SD card that only had an M80 and it is virtually instantaneous but then the Duet doesn't enter SBC mode.

      I saw DC42 is working on allowing a panel due to switch between standalone/SBC modes which I hope will also allow a config.g to do it too.

      Otherwise I'll have to wire in a USB adapter for +5v and make the printer "always" on.

      1 Reply Last reply Reply Quote 0
      • First post
        Last post
      Unless otherwise noted, all forum content is licensed under CC-BY-SA