Windows unable to flash Duet3 despite BOSSA port showing...

Jim46

At this point I've been able to verify successful movements of motors on:
X moves +/- on Driver 1
Y1 on Driver 2 moves +/-
Y2 on Driver 3 moves +/-
Y1 and Y2 not together
Z1 on Driver 4 moves +/-
Z2 on Driver 5 moves +/-
Z1 and Z2 not together

Jim46

Can you write this and would it work?

M584 E0 X1 Y2 Y3 Z4 Z5

A Former User

@Jim46 said in Windows unable to flash Duet3 despite BOSSA port showing...:

Can you write this and would it work?

M584 E0 X1 Y2 Y3 Z4 Z5

ah, they all worked independently then, thats good.

afaik the correct syntax was M584 E0 X1 Y2:3 Z4:5 but it could be some of the other commands require changes. Suggest you end this thread and create a new called "Independent dual X and dual Z" and post your config there to attract a config wizzard

ref https://forum.duet3d.com/topic/7773/forum-feature-mark-as-question-solved/2 on how to tag a thread as solved. first tag as question, then tag as answered.