Duet Pi Regression - How?
-
Specifying a specific version for only DSF never has worked as apt seems to insist on installing the most recent version for all of DSF's dependencies which aren't compatible. Maybe aptitude can do a better job of it?
also i think you need to removethat was a half finished thought. but seems autopurge might be excessive as it could remove configs from non duet packages; if purge is a goal i'd make sure to backup sd folder and specifyduetruntimeorapt purge duetcontrolserver duetruntime duetsd duetsoftwareframework duettools duetwebcontrol duetwebserver reprapfirmware(even though it may be subject to change if dsf gets new packages over time)pi@raspberrypi:~ $ sudo apt remove duetsoftwareframework -y Reading package lists... Done Building dependency tree Reading state information... Done Package 'duetsoftwareframework' is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. pi@raspberrypi:~ $ sudo apt autopurge -y Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. pi@raspberrypi:~ $ sudo apt install duetsoftwareframework=1.2.3.0 -y Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: duetsoftwareframework : Depends: duetcontrolserver (= 1.2.3.0) but 2.1.1 is to be installed Depends: duetsd (= 1.0.5) but 1.0.6 is to be installed Depends: duettools (= 1.2.3.0) but 2.1.1 is to be installed Depends: duetwebserver (= 1.2.1.0) but 2.1.0 is to be installed Depends: duetwebcontrol (= 2.0.4-1) but 2.1.5 is to be installed Depends: reprapfirmware (<= 1.2.3.0-999) but 2.1.1-1 is to be installed E: Unable to correct problems, you have held broken packages.this post has a 95% shortcut to get an apt command to deal with the issue
https://forum.duet3d.com/post/149932
pi@raspberrypi:~ $ bash dsfdep.sh 1.2.3.0 sudo apt install \ duetcontrolserver=1.2.3.0 \ duetruntime=1.2.3.0 \ duetsd=1.0.5 \ duettools=1.2.3.0 \ duetwebserver=1.2.1.0 \ duetwebcontrol=2.0.4-1 \ reprapfirmware=1.2.3.0-1 \ duetsoftwareframework=1.2.3.0 pi@raspberrypi:~ $ `bash dsfdep.sh 1.2.3.0` #note the backticks Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: duetcontrolserver duetruntime duetsd duetsoftwareframework duettools duetwebcontrol duetwebserver reprapfirmware 0 upgraded, 8 newly installed, 0 to remove and 0 not upgraded. Need to get 32.2 MB of archives. After this operation, 0 B of additional disk space will be used. Get:1 https://pkg.duet3d.com unstable/armv7 armhf duetruntime armhf 1.2.3.0 [28.7 MB] Get:2 https://pkg.duet3d.com unstable/armv7 armhf duetcontrolserver armhf 1.2.3.0 [173 kB] Get:3 https://pkg.duet3d.com unstable/armv7 armhf duetsd all 1.0.5 [1,998 B] Get:4 https://pkg.duet3d.com unstable/armv7 armhf duettools armhf 1.2.3.0 [49.9 kB] Get:5 https://pkg.duet3d.com unstable/armv7 armhf duetwebserver armhf 1.2.1.0 [70.7 kB] Get:6 https://pkg.duet3d.com unstable/armv7 armhf duetwebcontrol all 2.0.4-1 [2,811 kB] Get:7 https://pkg.duet3d.com unstable/armv7 armhf reprapfirmware all 1.2.3.0-1 [425 kB] Get:8 https://pkg.duet3d.com unstable/armv7 armhf duetsoftwareframework armhf 1.2.3.0 [1,710 B] Fetched 32.2 MB in 48s (671 kB/s) Selecting previously unselected package duetruntime. (Reading database ... 52338 files and directories currently installed.) Preparing to unpack .../0-duetruntime_1.2.3.0_armhf.deb ... Unpacking duetruntime (1.2.3.0) ... Selecting previously unselected package duetcontrolserver. Preparing to unpack .../1-duetcontrolserver_1.2.3.0_armhf.deb ... Unpacking duetcontrolserver (1.2.3.0) ... Selecting previously unselected package duetsd. Preparing to unpack .../2-duetsd_1.0.5_all.deb ... Unpacking duetsd (1.0.5) ... Selecting previously unselected package duettools. Preparing to unpack .../3-duettools_1.2.3.0_armhf.deb ... Unpacking duettools (1.2.3.0) ... Selecting previously unselected package duetwebserver. Preparing to unpack .../4-duetwebserver_1.2.1.0_armhf.deb ... Unpacking duetwebserver (1.2.1.0) ... Selecting previously unselected package duetwebcontrol. Preparing to unpack .../5-duetwebcontrol_2.0.4-1_all.deb ... Unpacking duetwebcontrol (2.0.4-1) ... Selecting previously unselected package reprapfirmware. Preparing to unpack .../6-reprapfirmware_1.2.3.0-1_all.deb ... Unpacking reprapfirmware (1.2.3.0-1) ... Selecting previously unselected package duetsoftwareframework. Preparing to unpack .../7-duetsoftwareframework_1.2.3.0_armhf.deb ... Unpacking duetsoftwareframework (1.2.3.0) ... Setting up duetruntime (1.2.3.0) ... Setting up duetwebcontrol (2.0.4-1) ... Setting up duetcontrolserver (1.2.3.0) ... Setting up duettools (1.2.3.0) ... Setting up duetwebserver (1.2.1.0) ... Setting up duetsd (1.0.5) ... Setting up reprapfirmware (1.2.3.0-1) ... [error] Duet is not available Setting up duetsoftwareframework (1.2.3.0) ... pi@raspberrypi:~ $ -
To the autopurge point, yah, I'd like to avoid that for exactly those two reasons: removes 'non package' files and could remove anything that apt thinks it should, outside the duet universe.
At the same time, I thought it would create a state where apt install with version number didn't do the "broken" thing. Obviously, it does not.
So... part of the reason for asking this question was to see if regression is worth scripting. Something that spits out all the commands, much like depcheck. Probably is...
Delta / Kossel printer fanatic
-
Why is that 95%? Or what is the 5% edge case?
Delta / Kossel printer fanatic
-
@Danal said in Duet Pi Regression - How?:
So... part of the reason for asking this question was to see if regression is worth scripting. Something that spits out all the commands, much like depcheck. Probably is...
afaik the only flaw is the recursive checking i limited to duetframework because it was the only package without a direct dependency to dsf (i.e. if that changes it fails, but then apt will complain so safe-ish)
-
@bearer said in Duet Pi Regression - How?:
@Danal said in Duet Pi Regression - How?:
So... part of the reason for asking this question was to see if regression is worth scripting. Something that spits out all the commands, much like depcheck. Probably is...
afaik the only flaw is the recursive checking i limited to duetframework because it was the only package without a direct dependency to dsf
Thanks!
-
and purging duetsd will clear out the most of /opt/dsf/sd folder
configs, macros, gcode, everything. -
@Danal said in Duet Pi Regression - How?:
Why is that 95%? Or what is the 5% edge case?
oh, and there is something weird with the reprapfirmeware n.n.n.n-1 and n.n.n.n-999 dependenices for otherwise identical versions. so i ignore the 999 in the rexeg
-
@bearer said in Duet Pi Regression - How?:
and purging duetsd will clear out the whole /opt/dsf/sd folder configs, macros, gcode, everything.
Agreed. I'm now on the warpath to avoid 'apt purge'.
'apt remove' only removes things in the package manifest, and deletes empty directories. If non empty, it will leave them. I believe the one time I regressed (by a manual method) that everything stayed intact, EXCEPT config.g had been overlaid with the empty-ish distribution copy. All other files, like tfree and tpost and so forth, and macros, they were all intact.
-
@bearer said in Duet Pi Regression - How?:
@Danal said in Duet Pi Regression - How?:
Why is that 95%? Or what is the 5% edge case?
oh, and there is something weird with the reprapfirmeware n.n.n.n-1 and n.n.n.n-999 dependenices for otherwise identical versions. so i ignore the 999 in the rexeg
Me too.
-
With regard to "how to recurse" without depending on the exact structure of the package, this seems to work, then parse the "depends" line:
apt show duetsoftwareframework=1.2.3.0 Package: duetsoftwareframework Version: 1.2.3.0 Priority: standard Section: electronics Maintainer: Duet3D Packaging Authority <pkg@duet3d.com> Installed-Size: unknown Depends: duetcontrolserver (= 1.2.3.0), duetsd (= 1.0.5), duettools (= 1.2.3.0), duetwebserver (= 1.2.1.0), duetwebcontrol (= 2.0.4-1), reprapfirmware (>= 1.2.3.0-1), reprapfirmware (<= 1.2.3.0-999) Homepage: https://pkg.duet3d.com Vcs-Git: https://github.com/chrishamm/DuetSoftwareFramework.git Download-Size: 1,710 B APT-Manual-Installed: yes APT-Sources: https://pkg.duet3d.com unstable/armv7 armhf Packages Description: Meta package for the full Duet software framework -
@Danal said in Duet Pi Regression - How?:
this seems to work,
missing duetruntime which is why i turne to recusion that ultimately failed if left run to to all the leaf nodes.
-
Hmmm... I wonder how it gets installed? With no dependency?
-
@Danal said in Duet Pi Regression - How?:
I wonder how it gets installed? With no dependency?
duetcontrolserver has it as a dependency iirc (thus the recursion)
-
Ah, light bulb just came on. Thank you.
-
And, by the way, autopurge (which I am NOT going to use) actually does not purge the recursive stuff after a
sudo apt install duetsoftwareframework=1.2.3.0 duetcontrolserver=1.2.3.0 duetruntime=1.2.3.0 duetsd=1.0.5 duettools=1.2.3.0 duetwebserver=1.2.1.0 duetwebcontrol=2.0.4-1 reprapfirmware=1.2.3.0-1
style install, and an apt remove duetsoftwareframework.
So.... it would not have worked anyway.
Delta / Kossel printer fanatic
-
Just switch to RPM
-
@gtj0 said in Duet Pi Regression - How?:
Just switch to RPM
+2
was wondering if aptitude* would be better suited, but decided to brush up on regex instead
*) not better than RPM..
-
@gtj0 said in Duet Pi Regression - How?:
Just switch to RPM
How about
//STEP1 EXEC PGM=SMPE? It handled prereqs, coreqs, and even postreqs flawlessly. Why, I've heard you could build and entire OS with it! -
@Danal said in Duet Pi Regression - How?:
and an apt remove duetsoftwareframework.
apt remove duet* reprapfirmwareis about the same length and oddly more specific. would work with remove and purge for that matter. -
@bearer said in Duet Pi Regression - How?:
@Danal said in Duet Pi Regression - How?:
and an apt remove duetsoftwareframework.
apt remove duet* reprapfirmwareis about the same length and oddly more specific. would work with remove and purge for that matter.Yah, I thought about the nicely structured names. As you said though, if the package changes...
