Error on Thermistors
-
yes thats what im gonna do... (tomorrow).
my eyesight is kinda tired... yes, im getting old.
-
this bellfuse is definitely bigger than the one that was installed.
-
assuming you guys care...
definitely the fuse was faulty... it measured around 13ohms when measured off the board... but the part was really tiny... who knows.
the belfuse was dead zero... I placed it on the back as shown on the dozuki link provided... still pending the 10kohm resistor...
anyways, this is my temp reading graph now.
-
@weput said in Error on Thermistors:
the part was really tiny
interesting, which revision of the board was it you had, look at the silk screen, on the top of the board.
good job on getting it sorted in the end!
-
@bearer said in Error on Thermistors:
good job on getting it sorted in the end!
is hardware version 1.0 m8
