SheetCam post processor
-
Has anyone used a Duet with SheetCam softare? They have several hundred gcode post processors, but none are Duets that I know of. I am hoping someone has a suggested post processor or the name of a machine that might process commands similarly to the Duet.
As an example one of the Machines TurboCNC v4 has these notes:
TurboCNC V4 post processor
Modal G-codes and coordinates
Uses G02/G03 for helical moves
No comments
Incremental IJIf there isn't a machine that is similar maybe there are attributes I should be looking for that would be compatible with the Duet.
-
if it has something for grbl or marlin it might be close.
-
No Marlin but it does have GRBL:
GRBL Mill-router
GRBL Mill-router 2 axis