Noctua 40x40x10 (12v) extruder fan on Duet3

[tobias_munich]

hi guys,

What I have to consider if i like to connect the Noctua Fan (12V) to my Duet3 board.
In the moment I run a 24V fan on "out8".

Tanks for your hints.

[deckingman]

@tobias_munich Duet 3 boards have 12V for fans - just change the jumper from V_fused to 12V. If it's a 2 wire fan, you can continue to use out8, otherwise you can use out4 - 6. https://duet3d.dozuki.com/Wiki/Duet_3_Mainboard_6HC_Wiring_Diagram

[tobias_munich]

@deckingman many thanks for your quick reply.