Can't get into settings tab web interface disconnects
-
I get ;
Communication Error
An AJAX error has been reported, so the current session has been terminated.
Please check if your printer is still on and try to connect again.
Error reason: SyntaxError: Unexpected token i in JSON at position 98
Worked fine until I made change to the config file (M201 X600 Y600 Z50 E1000 ; Accelerations (mm/s^2)) to the x and y axis. Now I am unable to go to settings in the web interface and shows that it is disconnected. I hit the back browser button to the machine control and it is connected without me doing anything and everything works as it has been.
-
Must be gremlins…..seems to suddenly be working!
