Triggers within homing files

Danal

What are the mechanics, and what is the Goal?

Ntrack

I'm running prusa's mmu2 on a cartesian printer with the duet. The goal is to disallow the homing of the selector axis if filament is fed through the selector.

First M581 command will home the axis if the filament is not detected, the second M581 will hide the mmu axes and send the message.

Danal

Got it. Thank you.

Have you seen the new RRF3 conditional gcode? I believe it would be perfect for this.

https://duet3d.dozuki.com/Wiki/GCode_Meta_Commands

Ntrack

Yes, that's the ultimate goal but it will be a steep learning curve for me. Last time I checked I couldn't find anything related to endstops states.

Danal

Fair point, it is very early in the release of conditionals.

The endstops will (should?) be in the object model. I don't have a machine accessible right now, but I believe they are down the "machine" > "sensors" part of the tree.

Ntrack

I can't see any machine part of the tree. I might be doing it wrong, I'm just running M409 in DWC and paste the return here .

Danal

M409 F"V" will get a much larger result.

Ntrack

No luck either, M409 F"v" returns:

{"key":"","flags":"V","result":{"boards":[{"firmwareFileName":"Duet2CombinedFirmware.bin","firmwareVersion":"3.01-beta1+1","iapFileNameSD":"Duet2CombinedIAP.bin","mcuTemp":{"current":43.0,"max":43.4,"min":42.2},"name":"Duet 2 WiFi","shortName":"2WiFi","vIn":{"current":24.2,"max":24.3,"min":24.1}}],"heat":{"coldExtrudeTemperature":160.0,"coldRetractTemperature":90.0,"heaters":[{"current":25.0,"sensor":0,"state":"Off"},{"current":25.0,"sensor":1,"state":"Off"}],"sensors":[{"lastReading":25.0,"name":"","type":"Thermistor"},{"lastReading":25.0,"name":"","type":"Thermistor"}]},"job":{"file":{"filament":[],"firstLayerHeight":0.0,"generatedBy":"","height":0.0,"lastModified":"28115-10-29T03:41:51","layerHeight":0.0,"numLayers":0,"printTime":0,"simulatedTime":0,"size":0},"lastFileName":"","layer":0,"timesLeft":{"filament":0.0,"file":0.0,"layer":0.0}},"move":{"axes":[{"homed":false,"letter":"X","max":247.0,"min":0.0,"userPosition":0.000,"visible":true},{"homed":false,"letter":"Y","max":210.0,"min":0.0,"userPosition":0.000,"visible":true},{"homed":false,"letter":"Z","max":200.9,"min":0.0,"userPosition":0.002,"visible":true},{"homed":false,"letter":"U","max":75.0,"min":0.0,"userPosition":0.000,"visible":true},{"homed":false,"letter":"V","max":1000.0,"min":-1000.0,"userPosition":0.000,"visible":true},{"homed":false,"letter":"W","max":78.0,"min":0.0,"userPosition":0.000,"visible":true},{"homed":false,"letter":"A","max":1000.0,"min":-1000.0,"userPosition":0.000,"visible":true}],"calibrationDeviation":{"deviation":0.000,"mean":0.000},"currentMove":{"requestedSpeed":0.0,"topSpeed":0.0},"daa":{"enabled":false,"minimumAcceleration":10.0,"period":0.0},"idle":{"factor":0.3,"timeout":50000},"initialDeviation":{"deviation":0.000,"mean":0.000},"meshDeviation":{"deviation":0.000,"mean":0.000},"printingAcceleration":600.0,"speedFactor":100.0,"travelAcceleration":3000.0},"network":{"interfaces":[{"actualIP":"192.168.0.12","firmwareVersion":null,"gateway":"0.0.0.0","subnet":"0.255.255.255","type":"wifi"}]},"state":{"currentTool":-1,"machineMode":"FFF","status":"Idle","upTime":42}}}

Danal

Hmmm.... I'm near a machine now, and I don't see any signs of endstops in the object module either.

Let me keep looking.

Ntrack

I found them running the latest beta.

Ntrack

I am almost there with the homing file using conditional code.

if sensors.endstops[4].triggered && state.status.idle
	M291 P"MMU loaded. Selector homing not allowed.Please unload MMU manually." S2

if sensors.endstops[4].triggered && state.status.printing
	M25
	M291 P"MMU loaded. Selector homing not allowed.Please unload MMU manually." S2	

else
	M913 U50              		 ; reduce motor current to 50% to prevent bad noises
	M915 U S5 F0			; set stall parameters
	G91                   		 ; use relative positioning
	G1 H1 U5 F2000            	  ; move out 5mm
	G1 H1 U-100 F1000       	     ; move carriage to home
	G90                 		   ; back to absolute positioning
	M400               		     ; make sure everything has stopped before we reset the motor currents
	M913 U100       		    ; motor currents back to normal

But , obviously is not working because state.status.idle is not the correct way of expressing the value of state.status.

Here is the state tree. Surely this is trivial for anyone who is used to any type of coding, not for me unfortunately.

Edit: state.status == "Idle" .