How to get my fans working properly?
-
Just finished upgrading my Robo R1+ to a Duet Maestro. All is working, but I'm having issues with my heatsink fan.
I'm currently running the following startup:
M106 P0 S1 I0 F500 H-1
M106 P1 T45 S1 I0 F500 H-1Fan 0 is my parts fan (seems to be working normally), Fan 1 is my heatsink fan.
As soon as the Maestro boots up, F1 turns on and stays on, irrespective of the hotend temperature. How do I fix this?
-
@Rat_Patrol said in How to get my fans working properly?:
M106 P1 T45 S1 I0 F500 H-1
H-1 disables thermostatic mode you should use H1 for Thermostatic mode
-
When I go from "H-1" to "H1", the heat sink fan is lost on the control panel completely.
-
this is right because it's in thermostatic mode
-
Ahh, I see.
-
It is working properly now, thanks!!!
