Not connecting
-
@dc42 said in Not connecting:
@Corexy, do you have DC ground connected to mains ground? I do that right at the PSU terminals. And how good is your mains ground?
Please confirm that you do not have a USB connection between the Duet and a PC - because if you did get a transient on ground, the USB ground loop would pass that to the electronics.
Cheers David,
I just put a meter on it, and mains power earth to the Meanwell PSU chassis is zero resistance, but the earth to the aluminium printer chassis is not so good.
I do not have the DC and AC earths connected...is that a thing? I've never seen that before but if you say it's the way to go I will.
Not sure what you mean about "do not have a USB connection between the Duet and a PC", but if you mean during a print, no never. I absolutely never hook up to the computer other than events like this. Everything I do is generally via the DWC.
Do you want me to connect the AC and DC earths to each other?
**EDIT.
Sitting here right now and we just had a large surge event of some sort...lights dimming, appliances making noises.
You could be forgiven for thinking I live in a 3rd world country with this sort of power supply, but this is a newish subdivision which supposedly had all the good gear.
-
@Corexy Out of curiosity, whereabouts in the world are you?
-
@deckingman said in Not connecting:
@Corexy Out of curiosity, whereabouts in the world are you?
I am on the lovely mid north coast of NSW, Australia, just out of Port Macquarie and about 70m from a patrolled surf beach.
It's absolutely beautiful except for 3D printers it seems.
I also lived in your country (if you are in the UK) for 2 years.
-
@Corexy said in Not connecting:
@deckingman said in Not connecting:
@Corexy Out of curiosity, whereabouts in the world are you?
I am on the lovely mid north coast of NSW, Australia, just out of Port Macquarie and about 70m from a patrolled surf beach.
It's absolutely beautiful except for 3D printers it seems.
I also lived in your country (if you are in the UK) for 2 years.
About half way between Sydney and Brisbane? Getting way off topic - I'll PM you.
-
This post is deleted! -
This post is deleted! -
@deckingman said in Not connecting:
@Corexy Just PM'd you - no point in cluttering up the forum with personal stuff.
Copy that, I just deleted my post for that reason
-
Yay! I'm back up.
Thank you to Roland with helping me out behind the scenes, and again I'd like to offer to send you these 2 blown (or just screwed up by my programming skills) boards at my expense so you can have a look at the effects of 2nd world mains power supply and sub tropical lightning storms on your gear. I don't want anything else, this would be on me as you've been a great help.
I will say that I had no trouble setting up my new board. I just run the configurator and uploaded the whole ZIP file, then copy/pasted my old config.g etc in there. Didn't even need to set the Z offset again.
It's all plugged into a full isolation UPS now, with brand new batteries and will never be plugged into an unprotected supply again.
I'm open to the possibility that I've done something wrong with the old boards, but given the properties history for blown up electronics I doubt it.
I do not think it has anything to do with the Duetwifi product itself, for the record.
-
@Corexy Glad you are sorted. Fingers crossed that's the end of your probs.
-
@deckingman said in Not connecting:
@Corexy Glad you are sorted. Fingers crossed that's the end of your probs.
You've seen my track record...you should be more careful with your fingers lol
Straight back into it though. I've got a Micro Swiss all metal kit for this model (Zortrax M200) and a very high temp build plate with Printbite on it. My plan is to get this one running some high temp PC prints, ABS and Nylon in this one. It really works well and I've got a good temp controlled cabinet on it.
In the meantime I bought this little Ender 3 Pro, but I'm kind of enjoying it anyway and it's an intro into V slot printers.
-
@Corexy said in Not connecting:
...you should be more careful with your fingers lol
Yes, I know - already mangled the little one .....
-
@deckingman said in Not connecting:
@Corexy said in Not connecting:
...you should be more careful with your fingers lol
Yes, I know - already mangled the little one .....
I'd be calling that "my backup" for reasons I won't be explaining.
-
@Corexy It's surprisingly useful sometimes to have a finger that size and shape, but I'll leave that to your imagination......
It kind of matches the lump on the back of my other hand caused by a badly set "boxers fracture" but I won't be explaining how I got that either.........
