Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    RRF3 Current Layer Anomaly - M404 related?

    Scheduled Pinned Locked Moved
    Tuning and tweaking
    1
    1
    98
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • SteveYYCundefined
      SteveYYC
      last edited by

      During my upgrade to RRF v3.0 I added the following to my config.g

      M404 N1.78 D0.4

      Since then I have noticed that the "Current Layer" on the status screen remains at zero for the first five layers I print (model layer height is 0.2mm) and then when the print ends the Current Layer is 5 less than the Total Layers it is being compared to on the status window. There is no actual issue with the print other than this reporting discrepancy.

      In the Gcode section of the Wiki it says ,"The 'D' parameter is used to properly detect the first layer height when files are parsed or a new print is being started."

      Is this M404 command causing this anomaly or could it be something else?

      1 Reply Last reply Reply Quote 0
      • First post
        Last post
      Unless otherwise noted, all forum content is licensed under CC-BY-SA