Strangest issue yet, Z not moving during print
-
@JamesM said in Strangest issue yet, Z not moving during print:
It was changed in rrf
i missed that change
-
@cdl1701yahoo-com said in Strangest issue yet, Z not moving during print:
I am using a Bltouch as my Z-probe and it triggers the nozzle is around 0.4 to 0.6 above the bed so I applied those Z offsets in the G10. I may not be doing it right though....
do check again, because it explains exactly why it does not move for the first 3 layers.
-
@Veti
Yep that was the whole issue did two prints last night and all went successfully.
Thanks for the help and pointing me in the right direction!
