Duet 3 and jetson Nano?

gtj0

Try the instructions from this post:
https://forum.duet3d.com/topic/11980/reprapfirmware-3-0-first-official-beta-is-out/69

I'm not sure if that will work though because the official packages are built for armhf (32 bit) instead of aarch64 which is the Nano's architecture. I'm sure they'll publish the aarch64 packages when they get a chance but in the mean time if you need them, I have aarch64 builds which I can get to you.

hanshogeland

@gtj0 said in Duet 3 and jetson Nano?:

in the mean time if you need them, I have aarch64 builds which I can get to you.

Oh you are so kind, yes I would like to have them - so you are running the Duet 3 with you Nano now?

gtj0

@hanshogeland I don't have the Duet 3 just yet but I added a bunch of packaging support to the DSF to build the aarch64 packages so I have the packages I just build as a test.

Give me a few minutes as I have to upload them.

gtj0

Here are the packages. It's the only way to get them for now I'm afraid.

wget --no-check-certificate http://dueui.org/dsf/binary-aarch64/duetcontrolserver_1.0.3.3_aarch64.deb
wget --no-check-certificate http://dueui.org/dsf/binary-aarch64/duetruntime_1.0.3.3_aarch64.deb
wget --no-check-certificate http://dueui.org/dsf/binary-aarch64/duetsd_1.0.1_all.deb
wget --no-check-certificate http://dueui.org/dsf/binary-aarch64/duetsoftwareframework_1.0.3.3_aarch64.deb
wget --no-check-certificate http://dueui.org/dsf/binary-aarch64/duettools_1.0.3.3_aarch64.deb
wget --no-check-certificate http://dueui.org/dsf/binary-aarch64/duetwebcontrol_2.0.0-2_all.deb
wget --no-check-certificate http://dueui.org/dsf/binary-aarch64/duetwebserver_1.1.0.0_aarch64.deb

hanshogeland

@gtj0 Thank you so much! I will come back with the result

gtj0

@hanshogeland said in Duet 3 and jetson Nano?:

@gtj0 Thank you so much! I will come back with the result

Heh, hold on a sec. It looks like DSF 1.0.3.4 was just released. Let me package that up real quick.

gtj0

OK for duetcontrolserver, duetruntime, duetsoftwareframework and duettools, substitute 1.0.3.3 with 1.0.3.4 in the file names.

hanshogeland

@gtj0 thx, again I ran this sudo dpkg -i /home/hans/duetcontrolserver_1.0.3.4_aarch64.deb and received

gtj0

@hanshogeland AH! Give me a minute.

gtj0

Try these:

wget --no-check-certificate http://dueui.org/dsf/binary-arm64/duetcontrolserver_1.0.3.4_arm64.deb
wget --no-check-certificate http://dueui.org/dsf/binary-arm64/duetruntime_1.0.3.4_arm64.deb
wget --no-check-certificate http://dueui.org/dsf/binary-arm64/duetsd_1.0.1_all.deb
wget --no-check-certificate http://dueui.org/dsf/binary-arm64/duetsoftwareframework_1.0.3.4_arm64.deb
wget --no-check-certificate http://dueui.org/dsf/binary-arm64/duettools_1.0.3.4_arm64.deb
wget --no-check-certificate http://dueui.org/dsf/binary-arm64/duetwebcontrol_2.0.0-2_all.deb
wget --no-check-certificate http://dueui.org/dsf/binary-arm64/duetwebserver_1.1.0.0_arm64.deb

hanshogeland

@gtj0 Yes, they worked i succesfully managed to install all of them in this order:

Get Packages:

wget --no-check-certificate http://dueui.org/dsf/binary-arm64/duetcontrolserver_1.0.3.4_arm64.deb
wget --no-check-certificate http://dueui.org/dsf/binary-arm64/duetruntime_1.0.3.4_arm64.deb
wget --no-check-certificate http://dueui.org/dsf/binary-arm64/duetsd_1.0.1_all.deb
wget --no-check-certificate http://dueui.org/dsf/binary-arm64/duetsoftwareframework_1.0.3.4_arm64.deb
wget --no-check-certificate http://dueui.org/dsf/binary-arm64/duettools_1.0.3.4_arm64.deb
wget --no-check-certificate http://dueui.org/dsf/binary-arm64/duetwebcontrol_2.0.0-2_all.deb
wget --no-check-certificate http://dueui.org/dsf/binary-arm64/duetwebserver_1.1.0.0_arm64.deb

Duet runtime need Curl

apt remove -y libcurl4 - If issues
apt install -y libcurl4 curl

Install in the following order:

sudo dpkg -i /home/user/duetruntime_1.0.3.4_arm64.deb
sudo dpkg -i /home/user/duetcontrolserver_1.0.3.4_arm64.deb
sudo dpkg -i /home/user/duetsd_1.0.1_all.deb
sudo dpkg -i /home/user/duetwebcontrol_2.0.0-2_all.deb
sudo dpkg -i /home/user/duetwebserver_1.1.0.0_arm64.deb
sudo dpkg -i /home/user/duettools_1.0.3.4_arm64.deb
sudo dpkg -i /home/user/duetsoftwareframework_1.0.3.4_arm64.deb

However when I start the serve i Get an error, maybe I need to setup the ip in a Json somewhere:

gtj0

No, what probably happened is that the DuetWebServer is actually already running.
Try these...

systemctl status DuetWebServer
pgrep -fa Duet
netstat -antp

gtj0

Oh, the other thing is to set up the GPIO that tells the control server that the duet is alive...
Need another few minutes to find that.

gtj0

Yeah. In /opt/dsf/conf/config.json, change "TransferReadyPin" from 25 to 13.
The GPIO pin numbering is different between the Pi and Nano.

wilriker

Please don't use 1.0.3.4 as this has some serious regressions. 1.0.3.3 is currently the best option.

gtj0

@wilriker OK, no problem. Thanks for the heads up.

gtj0

@hanshogeland I just uploaded the 1.0.3.3 arm64 packages. Same links, just change the version numbers.

hanshogeland

@gtj0 Thx, great I think I almost got it to work but I cannot get the website up, tried changing the http.json

A Former User

did you change the port to 2947?

gtj0

And when you do the netstat, use sudo so we can see what's listening on which ports..
sudo netstat -antp
I should have mentioned that before , sorry.