Pause print without moving X/Y or lift Z
-
Afternoon. I do allot of sequential printing which is fine accept when you Pause print as you know Duet2 moves the extruder to the edge of the bed - grinding it's way through all of the previously printed parts until it gets stuck.
Would it be possible for it to lift the Z high enough to clear anything else in the gcode file, or a Pause in place button which might just lift the z axis +25 or something.
Its just really irritating watching my gears skip on the belts when I forgot.
Cheers, James
-
look at /sys/pause.g and /sys/resume.g (but if those are at their defaults, the nozzle should clear your parts when pausing?)
