Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Delta printing PVDF

    Scheduled Pinned Locked Moved
    General Discussion
    1
    1
    189
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • andornotundefined
      andornot
      last edited by

      Finally moved my delta to the fume cupboard to print PVDF. If the PVDF over temperatures 300 plus then it can give off Hydrogen Fluride, nasty gas.

      Printing PVDF at 260 degrees, 60 degree bed on glass with 3dluc to aid adhesion, speed 15mm/s with 0.4mm retract. Good material to print, bonds very well between layers.

      We are using the PVDF as it is chemically compatible with solvents we are using the prints for. Below are some pictures of the setup.

      0_1557481088503_IMG_2125.JPG
      0_1557481106190_IMG_2126.JPG
      0_1557481118351_IMG_2128.JPG

      SpatialOne custom delta printer, upgrading to print PEEK, PEKK & Ultem

      1 Reply Last reply Reply Quote 1
      • First post
        Last post
      Unless otherwise noted, all forum content is licensed under CC-BY-SA