Bed heater sensors
-
I purchase creality bed heater sensors. Will these work? They are thermistors.
Is there a recommendation for a better way to go. I am using the Duet3d 6HC.
Thank you -
They will work.
Typically creality sensors are NTC 3950K's -
@jay_s_uk
Thank you, could you give an example on how to setup in Config.g -
@darylprice https://docs.duet3d.com/en/User_manual/Reference/Gcodes#m308-set-or-report-sensor-parameters
I would suggest a B value of 4092
