Print cancelled
-
Hey,
I am using Duet 2 WiFi with RRF 3.5.2 rc1.
Refer to the image below.
My problem is that the print gets canceled after this error. However, I checked the G-code and found nothing wrong with it. In the G-code, the line column 256 is not available.
My problem is similar to this:
https://forum.duet3d.com/topic/31149/error-gcode-file-too-long/20?_=1722841191495 -
@R006 I would say first update the firmware from 3.5.2RC1 to the full release version of 3.5.2 There has been a lot of bug fixes since RC1
