How to report current/last position and move on event

[OwenD]

From the documentation I linked above

How it works
Any time you pause a print from SD card, the state of the print is saved to a special file on the SD card, sys/resurrect.g

The example I showed above is after a pause.
When I initially went to get a sample, resurrect.g didn't exist, so I had to start a print and pause it to create one.
As I said, I don't know if it will put you on the exact line that caused the driver error, but it's fairly easy to use the object model to get the machine position at the time to compare.
You could either write it to file or use G60 to save it to a slot.

My own driver_stall.g re-homes after a stall rather than pauses so I use G60 but also write to a log file.
That's ok for a random stall but if there's a problem it'll keep stalling and re-homing.
I guess creating a "max stalls" variable would make sense.

;0:/sys/driver-stall.g
var yMotorTemp = {sensors.analog[5].lastReading  * 1.00}
var xMotorTemp = {sensors.analog[4].lastReading * 1.00}
var xDriver = 4
var yDriver = 1

if (param.D = var.xDriver)  || (param.D = var.yDriver)
	set var.yMotorTemp = sensors.analog[5].lastReading; get the current motor temp
	set var.xMotorTemp = sensors.analog[4].lastReading; get the current motor temp
	echo "X motor temp =", var.xMotorTemp ^ "C" , " : Y motor temp =", var.yMotorTemp ^ "C"

echo " A driver stall has occured on driver " ^ param.D
echo "Layer shifting may have occured at X:",move.axes[0].machinePosition, "Y:", move.axes[1].machinePosition, "Z:", move.axes[2].machinePosition
echo "Requested speed is " , move.currentMove.requestedSpeed, "mm/sec. Top speed is", move.currentMove.topSpeed, "mm/sec"
if (var.xMotorTemp !=0) || (var.yMotorTemp !=0)
	echo "X motor temp =", var.xMotorTemp ^ "C" , " : Y motor temp =", var.yMotorTemp ^ "C"
	
echo >>"0:/sys/print_log.txt" "A driver stall has occured on driver " ^ param.D
echo >>"0:/sys/print_log.txt"  "Layer shifting may have occured at X:",move.axes[0].machinePosition, "Y:", move.axes[1].machinePosition, "Z:", move.axes[2].machinePosition
echo >>"0:/sys/print_log.txt"  "Requested speed is " , move.currentMove.requestedSpeed, "mm/sec. Top speed is", move.currentMove.topSpeed, "mm/sec"
if (var.xMotorTemp !=0) || (var.yMotorTemp !=0)
	echo >>"0:/sys/print_log.txt"  "X motor temp =", var.xMotorTemp ^ "C" , " : Y motor temp =", var.yMotorTemp ^ "C"
echo >>"0:/sys/print_log.txt" "**********************************"	
; check if a driver stall is already being acted on.
if global.InMacro=true
	echo "Driver stall macro already running - no further action taken"
	M99 ; exit macro
M400

	
if job.file.fileName!= null ; check if we are printing
	set global.InMacro=true	; stop the mcro being run multiple times
	G60 S3 ; save position to slot 3
	echo "File position is ", job.filePosition, "bytes"
	echo "Physical position is X:",move.axes[0].machinePosition, "Y:", move.axes[1].machinePosition, "Z:", move.axes[2].machinePosition
	G4 P5
	; if a tool is selected and the heater is up to temp we'll retract
	if heat.heaters[tools[max(state.currentTool,0)].heaters[0]].current > heat.coldRetractTemperature
		G10
	G1 F1800 ; reduce speed before homing
	G28 X Y ; home X & Y
	M400
	M116
	set global.InMacro = false ; unset the flag so it will start looking for stalls on the return
	G1 F1200 ; reduce speed when travelling back to saved slot
	G1 R3 X0 Y0 Z5; travel to 5mm above stall position
	G1 F60 ; reduce speed
	G1 R3 X0 Y0 Z0 ; move to stall position
	; if a tool is selected and the heater is up to temp, we'll un-retract if required.
	if (heat.heaters[tools[max(state.currentTool,0)].heaters[0]].current > heat.coldExtrudeTemperature) && (tools[max(state.currentTool,0)].isRetracted)
		G11

[Triet]

@OwenD said in How to report current/last position and move on event:

From the documentation I linked above

I had already read that document but interpreted it solely in the context of power failure or power off (that is, configuring M911). Now I see that saving the position happens as a result of any pause of a print from SD card.

Anyway, all prerequisites are fulfilled to allow me to "catch" any layer shift due to stepper stalling and resume the print job, which is kind of cool. But I still need to learn that RRF scripting language (should not be a problem for me since it looks like a bash dialect).

Thanks for driving my RRF competence upwards - still learning (who doesn't?).

[Triet]

@OwenD said in How to report current/last position and move on event:

I went through your driver_stall.g and can only say:

I like that you gather diagnostic information allowing you to tackle the issue (it is a pity that the motor load e.g. voltage can't be reported, afaik). And I also understand why you do not pause, because you can continue the job without homing the Z axis (since steppers never were idle). Fine script!

[Triet]

@OwenD

I am wondering if it is possible to check if the stall event is a false positive case. In this case, the distance to the homing position would be unchanged. So it boils down to measuring the travel it takes to home and compare it to the saved position. If it is different than the saved position, a layer shift has occurred.

Do you know a way to do homing starting at some position and report the traveled distance?

One could move the nozzle using a high number of very small segments until the endstop triggers and then a count/sum over all moves would probably yield the result, but then the movement should be commanded stepwise for a good resolution and I don't know the implications of such a method. It seems to me that using this RRF "programming language" should allow to use a loop, iterating one move with one motor step at a time. What do you think?

[OwenD]

@Triet said in How to report current/last position and move on event:

@OwenD

I am wondering if it is possible to check if the stall event is a false positive case. In this case, the distance to the homing position would be unchanged. So it boils down to measuring the travel it takes to home and compare it to the saved position. If it is different than the saved position, a layer shift has occurred.

Do you know a way to do homing starting at some position and report the traveled distance?

You can do that using G1 H3
The sequence (posted by @DC42 a ling time ago) would be

G92 X0. ; Set current position to 0
G1 S3 X-300. ; Home to X minimum and set the axis limit
M208 ; Report axis limits
M208 S1 X0. ; Set axis limit back to 0
G92 X0. ; Set current position as 0

I thought about how to make that into a useful macro and came up with the following.
However I'm not really sure if it's of great benefit.
The driver won't report an error unless it thinks it's skipped a minimum of either 1 or 4 steps as I understand it.
A lot will depend on the repeatability of the end stop and whether the measured distance can be resolved to a meaningful number of steps difference.
It might help tuning for false positives.

I've tested the macro, but haven't introduced stalls or used it as part of an event.
I'd be interested to hear the results if you care to test it as such.

; dist2home.g
; ASSUMES HOMING TO MINIMA!!
; only accepts X and Y axes
; assumes X is axes[0] and Y is axes[1]

; send axis by using A parameter
; send threshold for number of steps to constitute false positive as D parameter
; e.g.
; M98 P"dist2home.g" A"Y" D"3"

; adjust as required
var dist2move = -500 ; set greater than all axies length
var thisAxis = "X" ; default to x axis,but can be changed if parameter sent
var moveSpeed = 600; speed during homing moves
var homeOnError = true ; home axes is error found
var return = true ; return to start position
var logErrors = true
var logFile = "0:/sys/driver_stall_log.txt"
var maxErrorSteps = 3 ; can be overwritten by param.D
var zLift = 2 ; amount to lift Z before moving
;*****************************************

; don't edit below here
var stepX = {1 / move.axes[0].stepsPerMm}
var stepY= {1 / move.axes[1].stepsPerMm}
var microStepsX = var.stepX / move.axes[0].microstepping.value
var microStepsY = var.stepY / move.axes[1].microstepping.value
var currentXlimit = move.axes[0].min
var currentYlimit = move.axes[1].min
var currentX = move.axes[0].machinePosition
var currentY = move.axes[1].machinePosition
var currentZ = move.axes[2].machinePosition
var xMove = var.dist2move ; will be reset as needed
var yMove = var.dist2move ; will be reset as needed
var searchPosX = move.axes[0].machinePosition
var searchPosY = move.axes[1].machinePosition
var hasErrorX = false;
var hasErrorY = false;
var measuredError = 0
var filePos = 0
if exists(param.A)
set var.thisAxis = param.A
if exists(param.S)
set var.maxErrorSteps = max(1,floor(param.S)) ; set max error steps to not oess than one, or param.D
if exists(param.R)
set var.filePos = param.R
var maxErrorX = var.maxErrorSteps * var.stepX
var maxErrorY = var.maxErrorSteps * var.stepY

if !move.axes[0].homed || !move.axes[1].homed || !move.axes[2].homed
echo "Machine not homed"
M99

M400 ; wait for any moves to stop
G60 S5 ; save position to slot 5

echo "selected axis is " ^ var.thisAxis
echo "start position X" ^ var.currentX ^ " Y" ^ var.currentY
if var.thisAxis = "X"
set var.yMove = 0
echo "Move amount is " ^ var.xMove
G92 X0 ; Set current X position to 0
G4 P100
G91
G1 Z{var.zLift} F120; raise Z
M400
G1 H3 X{var.xMove} F{var.moveSpeed}; Home to selected axis to minimum and set the axis limit
M400
set var.searchPosX = move.axes[0].min - var.currentXlimit
echo "Dist: " ^ abs(var.searchPosX) ^ " Start: " ^ var.currentX
set var.measuredError = abs(var.currentX - abs(var.searchPosX))
if var.measuredError <= var.maxErrorX
set var.hasErrorX = false
echo "Error amount on X ("^ var.measuredError ^ "mm) is less than or equal to " ^ var.maxErrorSteps ^ " steps " ^ "(" ^ var.maxErrorX ^ "mm)"
else
set var.hasErrorX = true
echo "Measured error on X is : " ^ var.measuredError ^ " mm"
echo "Full steps : " ^ floor(var.measuredError/var.stepX) ^ " + MicroSteps : " ^ floor(mod(var.measuredError,var.stepX)/var.microStepsX)
M208 S1 X{var.currentXlimit} Y{var.currentYlimit} ; Set axis limit back to original
M208 ; report axis setting
G90 ; absolute moves
G92 X{var.currentXlimit}

elif var.thisAxis = "Y"
set var.xMove = 0
G92 Y0 ; Set current position to 0
G91 ; set relative moves
G1 H3 Y{var.yMove} F{var.moveSpeed}; Home to selected axis to minimum and set the axis limit
M400
echo "Dist: " ^ abs(var.searchPosY) ^ " Start: " ^ var.currentY
set var.measuredError = abs(var.currentY - abs(var.searchPosY))
if var.measuredError <= var.maxErrorY
set var.hasErrorY = false
echo "Error amount on Y ("^ var.measuredError ^ "mm) is less than or equal to " ^ var.maxErrorSteps ^ " steps " ^ "(" ^ var.maxErrorY ^ "mm)"

else
	set var.hasErrorY = true
	echo "Measured error on Y is : " ^  var.measuredError  ^  " mm  :  Steps = "  ^  var.measuredError / var.stepY
echo "Full steps : " ^ floor(var.measuredError/var.stepY) ^ " + MicroSteps : " ^ floor(mod(var.measuredError,var.stepY)/var.microStepsY)
M208 S1 X{var.currentXlimit} Y{var.currentYlimit} ; Set axis limit back to original
M208 ; report axis settings
G90 ; absolute moves
G92 Y{var.currentYlimit}

else
echo "Undefined axis sent: " ^ param.A
echo "Exiting macro with no action"
G90 ; absolute moves
M99 ; exit macro

G90 ; absolute moves

if var.homeOnError
if var.hasErrorX
echo "homing X"
G28 X
if var.hasErrorY
echo "homing Y"
G28 Y
G1 R5 Z0 ; restore Z position
M400

if var.return
G1 R5 Z{var.zLift} F60
G1 R5 X0 Y0 Z{var.zLift} F3600; move back to original position
G1 R5 Z0 F60 ; lower Z to original
M400
echo "Position restored"
;G92 Y{var.currentYlimit}. X{var.currentX} Z{var.currentZ}; Set current position as original

if var.hasErrorX || var.hasErrorY
if var.logErrors
if !fileexists(var.logFile)
echo >{var.logFile} "Driver stall log"
echo >>{var.logFile} ""
echo >>{var.logFile} state.time
echo >>{var.logFile} "Print job: " ^ job.file.fileName ^ ""
echo >>{var.logFile} "File position: " ^ job.filePosition ^ " : First report @ " ^ var.filePos
if var.hasErrorX
echo >>{var.logFile} "Error amount X:" ^ var.currentX - abs(var.searchPosX) ^ " mm"
echo >>{var.logFile} "Full steps : " ^ floor(var.measuredError/var.stepX) ^ " + MicroSteps : " ^ floor(mod(var.measuredError,var.stepX)/var.microStepsX)
if var.hasErrorY
echo >>{var.logFile} "Error amount Y:" ^ var.currentY - abs(var.searchPosY) ^ " mm - Steps = " ^ abs(var.currentY - abs(var.searchPosY) ) / var.stepY
"Full steps : " ^ floor(var.measuredError/var.stepY) ^ " + MicroSteps : " ^ floor(mod(var.measuredError,var.stepY)/var.microStepsY)
echo >>{var.logFile} ""
else
if !fileexists(var.logFile)
echo >{var.logFile} "Driver stall log"
echo >>{var.logFile} ""
echo >>{var.logFile} state.time
echo >>{var.logFile} "Print job: " ^ job.file.fileName ^ ""
echo >>{var.logFile} "File position: " ^ job.filePosition ^ " : First report @ " ^ var.filePos
echo >>{var.logFile} "Stall detected on drive " ^ var.thisAxis ^ " was lower than threshold"
echo >>{var.logFile} ""

[Triet]

@OwenD said in How to report current/last position and move on event:

It might help tuning for false positives.

That is exactly what I am aiming to do. The idea is to configure a too sensitive stall detection on purpose to begin with and let the check macro run as it is triggered. Then at every occurrence of a false positive the macro would reduce the sensitivity and log the new setting. Print things that you can tolerate to last longer due to homing operations during the print job and that you can tolerate to have minimal layer shifting of up to 4 layers+endstop repeatability. At some point in time no more false positives are triggered as the sensitivity has been reduced enough. Then you have reached a situation where provoking a real motor stall event might be helpful, to confirm that the sensitivity settings that were settled down before really work (false positives are filtered but true positives should be still detected).

When a proven final sensitivity has been determined, the check macro can be decommissioned and driver-stall.g can be used with its intended purpose of resuming the print in the event of motor stalling without checking for false positives anymore.

This way, the configuration of stall detection can be more or less automated (at least this is the idea).

I will surely do something with this stuff and let you know the outcome (but I cannot promise when because I will be traveling soon). I am determined to put an end to ruined prints due to layer shifts.

[OwenD]

I am determined to put an end to ruined prints due to layer shifts.

Therein lies the rub.
You can react to a stall, but you can't fix a hardware problem with a software solution.
I've usually found the root cause of layer shifts to be mechanical in nature (bearing failure etc) or print parameter issues like the time my slicer setting for overhang extrusion was set to 100 (thinking it was %) when it should have been in the range 0-1 🤬

[OwenD]

It occurred to me that the macro wouldn't work if the axis minima was not zero, so I've adjusted it to cater for that.

After running it many times, it seems to show that in my case at least, the repeatability of the end stops is poor.
Or at least inconsistent enough that the error can amount to between 1 and 3 steps.
So I'm not sure it's going to work as desired.

[Triet]

@OwenD said in How to report current/last position and move on event:

You can react to a stall, but you can't fix a hardware problem with a software solution.

I do know very well where the problem lies.

I got a cheap kit for a DIY printer with... cheap 2A stepper motors. I am not disappointed since I knew that in advance. But every now and then I forget that and challenge their limits. It is mostly about travel settings. What works for small pieces will fail for large ones (I often blunder into that trap). Or if I print very tall models (a lithophan for example) with the combing setting "Not in skin" and with a very fine layer thickness of 0.08 mm, then the nozzle travels along the solid wall and drags its surface a bit, because either the oozed bits of plastic unwillingly deposited are too much for this layer height, or just a small percentage of overflow increasingly causes slight changes of the height (comparable to the small layer height) causing the nozzle to hit it (hint: never let the nozzle ooze, anywhere). Z hop to avoid that? You get even more debris. Not to speak about curling infills like "lightning". Or infills with crossing lines (with little bumps in the intersections).

And at times I get too ambitious and want to improve the small details of the print to the max. Then I play with jerk and other things and ...bang! Layer shifting! Again and again new situations catch me in the act of gathering experience.

That is not a tragedy at all (this is just a hobby), but I do regret a failed print that was already running for two days and can't be finished on time like a birthday present, as an example. And of course, I also strive for perfection - a questionable goal in 3d printing.

[Triet]

@OwenD said in How to report current/last position and move on event:

So I'm not sure it's going to work as desired.

For the check macro it would be enough to do the coordinates comparison with a tolerance of say 4 steps to decide whether false positive or not (im my case, most real layer shifts are significantly larger)

But for the resume function... well, optical endstops would perhaps work better. They are quite cheap.

Still, better a printed piece with minuscule horizontal layer inconsistencies than spaguetti on the bed.

[OwenD]

I've put some thought into semi-automating the process of adjusting the parameters affecting stall detection.
Unfortunately the values of M915 are not exposed to the object model.
So instead they must be entered into an array.
These initial values will be applied regardless of your M915 settings,
so they should be set to the same value at the start of the process and after any changes to config are made.

For this to work I have three files.
The first is driver-stall.g
If this is called, and the axis involved is X or Y then it will call dist2home.g which will measure whether there were steps lost and re-home etc.
You can then from that call auto_adjust_stall.g which will optionally adjust M915, jerk and acceleration values up to pre-defined values.
Any changes are logged to file and the console.
At some point you should stop getting stall events during the test print

At the end of the print you should

• review the settings
• confirm that they will capture valid stalls without false positives
• adjust your config.g to reflect the last adjustment

I've tested the system but not extensively

driver-stall.g

;0:/sys/driver-stall.g

var allowedSteps = 3 ; adjust as required.  Number of measured steps to constitute a valid error
var macroLocation = "0:/macros/homing/dist2home.g" ; adjust as required

var filePos = job.filePosition
M400 ; wait for moves in queue to stop
G60 S5 ; save position to slot 5
M25 ; pause
G1 R5 X0 Y0 Z0 F3600;
M400

var Axis = "" ; start with no value
var subLoop = 0
var mainLoop = 0
echo "stall on driver " ^ param.D
while var.mainLoop < #move.axes
	set var.subLoop = 0
	while var.subLoop < #move.axes[var.mainLoop].drivers		
	if (param.D ^ "") = (move.axes[var.mainLoop].drivers[var.subLoop] ^ "")
		set var.Axis = move.axes[var.mainLoop].letter
		set var.subLoop = var.subLoop + 1
	set var.mainLoop = var.mainLoop + 1
if var.Axis = ""
	echo "No axis letter found for driver " ^ param.D
	M99
else
	echo "Error is on " ^ var.Axis ^ " axis"
	if (var.Axis="X") || (var.Axis="Y")
		M98 P{var.macroLocation} A{var.Axis} S{var.allowedSteps} R{var.filePos} D{param.D}; only run the file if it's X or Y axis fault
M24 ; resume print
	

dist2home.g

; dist2home.g
; should be called by driver-stall.g
; ASSUMES HOMING TO MINIMA!!
; only accepts X and Y axes
; assumes X is axes[0] and Y is axes[1]

; send axis by using A parameter
; send threshold for number of steps to constitute false positive as S parameter
; send driver number as D paramater
; send file position of error from driver-stall as R parameter
; e.g.
; M98 P"dist2home.g" A"Y" S"3" D"1" R"43251"

; **********adjust as required**********
var dist2move = -500 ; set greater than all axies length
var thisAxis = "X" ; default to x axis,but can be changed if parameter sent
var moveSpeed = 600; speed during  homing moves
var homeOnError = true ; home axes is error found
var return = true ; return to start position
var logErrors = true ; save details to a log file
var logFile =  "0:/sys/driver_stall_log.txt" ; location of log file
var maxErrorSteps = 3 ; can be overwritten by param.S
var zLift = 2 ; amount to lift Z before moving
var adjustOnError = true; call auto adjust on measured error
var adjustOnFalseAlarm = true ; call auto adjust on false alarm
var adjustMacro = "0:/macros/homing/auto_adjust_stall.g"  ; file to run if automatic adjustments are enabled
;*****************************************

; don't edit below here
var stepX =  {1  / move.axes[0].stepsPerMm}
var stepY=  {1 / move.axes[1].stepsPerMm}
var microStepsX = var.stepX / move.axes[0].microstepping.value
var microStepsY = var.stepY / move.axes[1].microstepping.value
var currentXlimit = move.axes[0].min
var currentYlimit = move.axes[1].min
var currentX = move.axes[0].machinePosition
var currentY = move.axes[1].machinePosition
var currentZ = move.axes[2].machinePosition
var xMove = var.dist2move ; will be reset as needed
var yMove = var.dist2move ; will be reset as needed
var searchPosX = move.axes[0].machinePosition
var searchPosY = move.axes[1].machinePosition
var hasErrorX = false;
var hasErrorY = false;
var measuredError = 0
var filePos = 0
if exists(param.A)
	set var.thisAxis = param.A
if exists(param.S)
	set var.maxErrorSteps = max(1,floor(param.S)) ; set max error steps to not less than one, or param.S
if exists(param.R)
	set var.filePos = param.R
var maxErrorX = var.maxErrorSteps * var.stepX
var maxErrorY = var.maxErrorSteps * var.stepY	

if !move.axes[0].homed || !move.axes[1].homed || !move.axes[2].homed
	echo "Machine not homed"
	M99

M400 ; wait for any moves to stop
G60 S5 ; save position to slot 5


echo "selected axis is " ^ var.thisAxis
echo "start position X" ^ var.currentX ^ " Y" ^ var.currentY
if var.thisAxis = "X"
	set var.yMove = 0
	echo "Move amount is " ^ var.xMove
	G92 X0 ; Set current X position to 0
	G4 P100
	G91
	G1 Z{var.zLift} F120; raise Z 
	M400
	G1 H3 X{var.xMove}  F{var.moveSpeed}; Home to selected axis to minimum and set the axis limit
	M400
	set var.searchPosX =  move.axes[0].min    -  var.currentXlimit 
	echo  "Dist: " ^ abs(var.searchPosX)  ^ " Start: " ^  var.currentX
	set var.measuredError = abs(var.currentX - abs(var.searchPosX)) 
	if  var.measuredError <= var.maxErrorX
		set var.hasErrorX = false
		echo "Error amount on X ("^ var.measuredError ^ "mm) is less than or equal to " ^ var.maxErrorSteps ^ " steps " ^ "(" ^ var.maxErrorX ^ "mm)"
		
	else
		set var.hasErrorX = true
		echo "Measured error on X is : " ^  var.measuredError  ^  " mm" 
	echo "Full steps : " ^ floor(var.measuredError/var.stepX) ^ " + MicroSteps : " ^ floor(mod(var.measuredError,var.stepX)/var.microStepsX)
	M208 S1 X{var.currentXlimit} Y{var.currentYlimit} ; Set axis limit back to original
	M208 ; report axis setting
	G90 ; absolute moves
	G92 X{var.currentXlimit}
		
elif var.thisAxis = "Y"
	set var.xMove = 0
	G92 Y0 ; Set current position to 0
	G91 ; set relative moves
	G1 H3 Y{var.yMove} F{var.moveSpeed}; Home to selected axis to minimum and set the axis limit
	M400
	echo  "Dist: " ^ abs(var.searchPosY)  ^ " Start: " ^  var.currentY
	set var.measuredError = abs(var.currentY - abs(var.searchPosY)) 
	if  var.measuredError <= var.maxErrorY
		set var.hasErrorY = false
		echo "Error amount on Y ("^ var.measuredError ^ "mm) is less than or equal to " ^ var.maxErrorSteps ^ " steps " ^ "(" ^ var.maxErrorY ^ "mm)"
		
	else
		set var.hasErrorY = true
		echo "Measured error on Y is : " ^  var.measuredError  ^  " mm  :  Steps = "  ^  var.measuredError / var.stepY
	echo "Full steps : " ^ floor(var.measuredError/var.stepY) ^ " + MicroSteps : " ^ floor(mod(var.measuredError,var.stepY)/var.microStepsY)
	M208 S1 X{var.currentXlimit} Y{var.currentYlimit} ; Set axis limit back to original
	M208 ; report axis settings
	G90 ; absolute moves
	G92 Y{var.currentYlimit}
	
else
	echo "Undefined axis sent: " ^ param.A
	echo "Exiting macro with no action"
	G90 ; absolute moves
	M99 ; exit macro
		
G90	; absolute moves


if var.homeOnError	
	if var.hasErrorX
		echo "homing X"	
		G28 X
	if var.hasErrorY
		echo "homing Y"
		G28 Y
	G1 R5 Z0 ; restore Z position
M400
		
		
if var.return
	G1 R5 Z{var.zLift} F60 
	G1 R5 X0 Y0 Z{var.zLift} F3600; move back to original position
	G1 R5 Z0 F60 ; lower Z to original
	M400
	echo "Position restored"
	;G92 Y{var.currentYlimit}. X{var.currentX} Z{var.currentZ}; Set current position as original
	
if var.hasErrorX || var.hasErrorY
	if var.logErrors
		if !fileexists(var.logFile)
			echo >{var.logFile} "Driver stall log"
			echo >>{var.logFile} "*******************************************"
		echo >>{var.logFile} state.time
		echo >>{var.logFile} "Print job: " ^ job.file.fileName ^ ""
		echo >>{var.logFile} "File position: " ^ job.filePosition ^ " : First report @ " ^ var.filePos
		if var.hasErrorX
			echo >>{var.logFile} "Error amount X:" ^  var.currentX - abs(var.searchPosX) ^  " mm"
			echo >>{var.logFile} "Full steps : " ^ floor(var.measuredError/var.stepX) ^ " + MicroSteps : " ^ floor(mod(var.measuredError,var.stepX)/var.microStepsX)
		if var.hasErrorY
			echo >>{var.logFile}  "Error amount Y:" ^ var.currentY - abs(var.searchPosY)   ^  " mm - Steps = "  ^  abs(var.currentY - abs(var.searchPosY) ) / var.stepY
			"Full steps : " ^ floor(var.measuredError/var.stepY) ^ " +  MicroSteps : " ^ floor(mod(var.measuredError,var.stepY)/var.microStepsY)
		echo >>{var.logFile} "*******************************************"
	if var.adjustOnError	
		M98 P{var.adjustMacro} D{param.D}
else
	if !fileexists(var.logFile)
		echo >{var.logFile} "Driver stall log"
		echo >>{var.logFile} "*******************************************"
	echo >>{var.logFile} state.time
	echo >>{var.logFile} "Print job: " ^ job.file.fileName ^ ""
	echo >>{var.logFile} "File position: " ^ job.filePosition ^ " : First report @ " ^ var.filePos
	echo >>{var.logFile} "Stall detected on drive " ^ var.thisAxis ^ " was lower than threshold"
	echo >>{var.logFile} "*******************************************"
	if var.adjustOnFalseAlarm	
		M98 P{var.adjustMacro} D{param.D}

auto_adjust_stall.g

;auto_adjust_stall.g
; Must be called from dist2home.g
; do not run as stand alone
; NOTE:  Values are not stored between boots.
; values must be applied to config.g when satisfied they capture valid stalls without false positives
; Axis diver number must be passed as D parameter

; array containing initial M915 values for X and Y drivers first value is S (threshold) second is H
; set initial values here.  Must be manually set as not available from object model
; should match your config.g initially

var stallVals = {{4,250},{4,200}}

; values to change and amounts to change by.  Also min/max allowed	
var increaseS = true ; adjust M915 S parameter true/false
var amountS = 1 ; amount to adjust (increase) by on each stall event
var maxS = 8 ; maximum allowed value before auto adjust stops applying
var increaseH = true ; adjust M915 H parameter true/false
var amountH = 4 ; amount to adjust (increase) by on each stall event
var maxH = 300 ; maximum allowed value before auto adjust stops applying
var reduceJerk = true ; adjust (reduce) jerk value on stall event true/false
var amountJerk = 10 ; amount to adjust (decrease) jerk on each stall event
var minJerk = 500 ; minimum jerk value allowed before auto adjust stops applying
var reduceAccel = true ;adjust (reduce) acceleration value on stall event true/false
var amountAccel = 20 ;amount to adjust (decrease) acceleration on each stall event
var minAccel = 600 ; ; minimum jerk value allowed before auto adjust stops applying


var logFile =  "0:/sys/driver_stall_log.txt" ; file to log changes to
if !fileexists(var.logFile)
	echo >{var.logFile} "File created : " ^ state.time

if !exists(param.D)
	echo "No D parameter passed.  Auto stall adjust not carried out"
	M99

; ensure driver number resolves to X or Y (assumes x & Y are axes 0 & 1)
var thisAxis = ""
var validDriver = false
while iterations < #move.axes[0].drivers
	if (move.axes[0].drivers[iterations]) == {""^param.D^""}
		set var.validDriver = true
		set var.thisAxis = "X"

while iterations < #move.axes[1].drivers
	if (move.axes[1].drivers[iterations]) == {""^param.D^""}
		set var.validDriver = true
		set var.thisAxis = "Y"

if (var.validDriver = false) || (var.thisAxis = "")
	echo "Only X and Y axis supported - Auto stall not adjusted"
	M99


echo "Axis to adjust is " ^ var.thisAxis
	
; Store the stall values in a global so they are persistant between events
; It will be updated each time the macro runs after that
if !exists(global.M915vals)
	global M915vals = var.stallVals 
	if var.thisAxis = "X"
		M915 X S{global.M915vals[0][0]} H{global.M915vals[0][1]}
	if var.thisAxis = "Y"
		M915 X S{global.M915vals[1][0]} H{global.M915vals[1][1]}	
echo "Current M915 values..."
M915
G4 P200
		

echo >>{var.logFile} "******************************"
echo >>{var.logFile} "Auto stall adjust called at " ^ state.time

if var.thisAxis = "X"
	G4 P100
	if global.M915vals[0][0] >= var.maxS
		G4 P200
		echo "Maximum S value reached - no further adjustment will occur"
	if global.M915vals[0][1] >= var.maxH
		G4 P100
		echo "Maximum H value reached - no further adjustment will occur"
	if (var.increaseS = true) && (global.M915vals[0][0] <= (var.maxS-var.amountS)) ; see if values should be increased
		set global.M915vals[0][0] = global.M915vals[0][0] + var.amountS
		G4 P100
		echo "S param set to " ^ global.M915vals[0][0]
	if var.increaseH = true && (global.M915vals[0][1] <= (var.maxH-var.amountH))
		set global.M915vals[0][1] = global.M915vals[0][1] + var.amountH
	if (var.increaseS = true) || (var.increaseH = true) ; check if new values must be applied
		M915 X S{global.M915vals[0][0]} H{global.M915vals[0][1]} ; set new values
		echo >>{var.logFile} "New X axis M915 values set - S=" ^ global.M915vals[0][0] ^ " H=" ^ global.M915vals[0][1]
		G4 P200
		echo "New M915 values are..."
		G4 P200
		M915 ; echo new values to console
	G4 P200
	if (var.reduceJerk = true) && (move.axes[0].jerk >= (var.minJerk + var.amountJerk)) ; see if jerk is to be reduced
		M566 X{move.axes[0].jerk - var.amountJerk} 
		echo >>{var.logFile} "X jerk reduced to " ^ {move.axes[0].jerk - var.amountJerk}
		G4 P200
		M566

	if (var.reduceAccel = true) && (move.axes[0].acceleration >= (var.minAccel + var.amountAccel)) ; see if acceleration is to be reduced
		M201 X{move.axes[0].acceleration - var.amountAccel} 
		echo >>{var.logFile} "X acceleration reduced to " ^ {move.axes[0].acceleration - var.amountAccel}
		G4 P100
		M201
	
if var.thisAxis = "Y"
	if global.M915vals[1][0] >= var.maxS
		G4 P100
		echo "Maximum S value reached - no further adjustment will occur"
	if global.M915vals[1][1] >= var.maxH
		G4 P100
		echo "Maximum H value reached - no further adjustment will occur"
	if (var.increaseS = true) && (global.M915vals[0][0] <= (var.maxS-var.amountS)) ; see if values should be increased
		set global.M915vals[1][0] = global.M915vals[1][0] + var.amountS
	if var.increaseH = true && (global.M915vals[1][1] <= (var.maxH-var.amountH))
		set global.M915vals[1][1] = global.M915vals[1][1] + var.amountH
	if (var.increaseS = true) || (var.increaseH = true) ; check if new values must be applied
		M915 Y S{global.M915vals[1][0]} H{global.M915vals[1][1]} ; set new values
		G4 P200
		echo >>{var.logFile} "New Y axis M915 values set - S=" ^ global.M915vals[1][0] ^ " H=" ^ global.M915vals[1][1]
		G4 P100
		echo "New M915 values are..."
		G4 P200
		M915 ; echo new values to console
	G4 P100
	if (var.reduceJerk = true) && (move.axes[1].jerk >= (var.minJerk + var.amountJerk)) ; see if jerk is to be reduced
		M566 Y{move.axes[1].jerk - var.amountJerk} 
		echo >>{var.logFile} "Y jerk reduced to " ^ {move.axes[1].jerk - var.amountJerk}
		G4 P200
		M566
	
	if (var.reduceAccel = true) && (move.axes[1].acceleration >= (var.minAccel + var.amountAccel)) ; see if acceleration is to be reduced
		M201 Y{move.axes[1].acceleration - var.amountAccel} 
		echo >>{var.logFile} "Y acceleration reduced to " ^ {move.axes[1].acceleration - var.amountAccel}
		G4 P100
		M201

Files for download

driver-stall.g

auto_adjust_stall.g

dist2home.g