Problem Closed Loop tuning plugin (DWC 3.5 RC1)
-
Problem installing Closed Loop tuning plugin (DWC 3.5 RC1 and DWC 3.4.6)
Hi, It would be appreciated if anyone could throw any light on this.
I have been able to install version 3.4 B1 (https://github.com/Duet3D/Closed-Loop-Plugin/releases/tag/v3.4-b1)
If I remove that version and try to install a later version the installation fails.(The same message shows for https://github.com/Duet3D/Closed-Loop-Plugin/releases/tag/v3.5.0-b1
https://github.com/Duet3D/Closed-Loop-Plugin/releases/tag/v3.5.0-beta.4I have tried this with DWC 3.5RC1 and DWC 3.4.6 installed on MB6HC (M122 shows the version installed and is as expected in both cases) In both cases it fails and shows these messages
AND:
-
@kj3d you need to have the newer version of DWC installed to use newer plugins
-
Hi, I have tried to use DWC 3.5 RC 1 - is that not the latest version?
-
@kj3d they may be coded to a specific version. try DWC 3.5b4
-
@jay_s_uk - I have tried it, sadly it does not work
-
@kj3d strange. I'm running 3.5b4 on DWC 3.5-rc1. I would check again to make sure you've updated DWC
-
@jay_s_uk - Just reinstalled 3.5RC1 and attempted to install plugin 3.5b4 (Powered down after install of3.RC1 and booted again)
I am uploading using the "upload system files" and "install plugin buttons", both methods give the same result
-
But - General tab still shows it as DWC 3.4.6
-
URIKA - I reloaded the DWC Web Control - SD file.zip and all sorted
https://github.com/Duet3D/RepRapFirmware/releases/download/3.5.0-rc.1/DuetWebControl-SD.zip
Thanks everyone for the help
