Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    12V fan

    General Discussion
    2
    2
    701
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • patelundefined
      patel
      last edited by

      Any one can explain how to wiring 12V fan to duet wifi board. I see all pin and jump on 5V

      1 Reply Last reply Reply Quote 0
      • DjDemonDundefined
        DjDemonD
        last edited by

        See https://www.duet3d.com/wiki/Connecting_and_configuring_fans

        Vfan jumper has 3 pins. One is always +5v from the 5v regulator on the duet (or possibly external 5v if you have that jumper set). One is Vin from your psu so 12 or 24v usually. The jumper connects the fan positive bus which runs to all the fan headers both pwm and always-on, to either 5v or Vin depending on the jumper connection.

        So chose one.

        However you can be clever with it. I have some 5v fans and some 24v fans. The 5v fans positive comes off the +5v pin of the vfan header and are grounded via the fan header GND of your choice. The pwm is achieved through the gnd. The rest of my fans plug into the fan headers directly and my vfan jumper is set to Vin (I have a 24v psu).

        You can also have 12v fans on a 24v system by connecting 12v to the central pin of vfan header.

        Simon. Precision Piezo Z-Probe Technology
        www.precisionpiezo.co.uk
        PT1000 cartridge sensors NOW IN, just attach to your Duet board directly!

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA