Was is worth it ....

[Dad003]

Well I reprinted my motor mount with a few tweak , new y axis in , just need more calibration. Kinda enclosed my top too now.
I still need to calibrated my config , him at 800 jerk 10k acceleration, my stepper motor are capped with those number I believe , but I have better one on order . before the swap i was running 6k acc

Firt benchy 35min , .6 nozzle .25 height. in PETG Him still missing some cooling fan but it still pretty good

here was the input shaper give me for data

Top is old , bottom new hgr15 vs mgn9 + carbon fiber tube about 1/2 to 2/3 lighter.