My latest head scan print.

Toddimus

Very, very cool.

Out of curiosity, is this done with the "vase" spiral mode, or are there more than one perimeters per layer?

If it's not a spiral, how did you deal with the seams? Are they running up the back of his head?

And what slicer program did you use?

bot

Thanks. It was not done with spiral vase mode. There are 3 perimeters, and no infill other than selective solid infill simplify3d puts to maintain shell thickness.

Yes, the seam is running up the back. It's pretty small but still visible. I actually sculpted the back and top of his head smooth to help alleviate some suspected problems with the rough hair, so the back is kinda funny looking.

Toddimus

Thanks for the info. Now that I have my printer mostly dialed in, I'm looking into slicers and slicing parameters. I was curious how you did it.
Cheers!

ianlee74

Nice job. How did you get the scan?

bot

Thanks. It was professionally done by a company called Pixel Light Effects. I got a second one done, too, and printed some 1/6th scale heads as a test: http://imgur.com/a/kwwDL

jml

That is amazing! The skin is is so detailed! And I can barely notice the print lines!

bot

Thanks! It is pretty good, but I'm almost ready to build a printer that should produce even better results… all made possible by Duet.

As a side note, this head print was one of my longest prints until just the other day -- 204 hours print time is now my new record (client's print, can't show pics unfortunately.)

Not a single ajax disconnect in those 204 hours! (Duet 0.8.5 on an ancient beta firmware 1.15) (Sorry for any users encountering troubles, not meant as a low blow.)

deckingman

@bot:

…...................
As a side note, this head print was one of my longest prints until just the other day -- 204 hours print time is now my new record (client's print, can't show pics unfortunately.)
..........................

Wow! That's like 8 and a half days - hope you charged the client a lot of money.

bot

It was only part of an order, but that part alone was priced at about $650.

Jarery

Cool, if your brother get an iPhone X you can probably unlock it