Ooznest Z1+ Emergency stop - router control?

A Former User

Following on from the router control [on/off] using heater output and solid state relays, Ooznest's new Workbee Z1+ has a built in emergency stop. Does anyone know if this could be used to also stop the router/spindle with similar methods, such as using a positive out from the board to a separate in-line solid state relay? I'm guessing that the stop will not cut power to the router as supplied. Obviously you wouldn't want an emergency stop dependent upon a macro.

I have not yet purchased the CNC, but would like to plan enclosure/positioning before I go ahead and order as this may determine which size CNC is best for the space.

Thanks in anticipation